WeatherStation¶
Note
This page is generated by python script generate_cet.py.
Commands¶
disable¶
Description: Transition from state Enabled to Disabled.
- EFDB_Topic
SALGeneric_command_disable
- Category
csc
enable¶
Description: Transition from state Disabled to Enabled.
- EFDB_Topic
SALGeneric_command_enable
- Category
csc
exitControl¶
Description: Transition from state Standby to Offline. For CSCs that start in Standby state this makes the CSC quit. CSCs that start in Offline state, they remain active.
- EFDB_Topic
SALGeneric_command_exitControl
- Category
csc
setAuthList¶
- EFDB_Topic
SALGeneric_command_setAuthList
- Category
csc
setLogLevel¶
Description: Set the logging level.
- EFDB_Topic
SALGeneric_command_setLogLevel
- Category
csc
level¶
- IDL_Type
int
- Units
unitless
Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type
string
- Units
unitless
Description: If the CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to the CSC itself.
standby¶
Description: Transition from state Offline, Disabled or Fault to Standby.
- EFDB_Topic
SALGeneric_command_standby
- Category
csc
start¶
Description: Transition from state Standby to Disable, in a specified configuration.
- EFDB_Topic
SALGeneric_command_start
- Category
csc
configurationOverride¶
- IDL_Type
string
- Units
unitless
- Description:
Configuration override in the form [{name}][:{version}]. For salobj-based CSCs: name is a filename with “.yaml” suffix and version is a git hash; for example:
“foo.yaml” specifies just a file. Two or three config files are loaded: “_init.yaml”, “_{site}.yaml” (if present), and “foo.yaml”.
“:37bf936” specifies just a git hash. One or two config files are loaded from the specified git commit: “_init.yaml” and “_{site}.yaml” (if present.
“bar.yaml:HEAD~2” specifies both a file and a git hash. Two or three config files are read from the specified git commit: “_init.yaml”, “_{site}.yaml” (if present), and “bar.yaml”.
Events¶
authList¶
- EFDB_Topic
SALGeneric_logevent_authList
- Category
csc
configurationApplied¶
Description: Information about CSC’s configuration.
- EFDB_Topic
SALGeneric_logevent_configurationApplied
- Category
configurable
configurations¶
- IDL_Type
string
- Units
unitless
Description: A comma-separated list of configurations applied. If configuration comes from a clone of a git repo, or similar directory, then it will be a list of file names, without the file extension. Ignore whitespace after commas.
version¶
- IDL_Type
string
- Units
unitless
Description: Version of the configuration source. For a clone of a git repo it will be a git hash.
url¶
- IDL_Type
string
- Units
unitless
Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL. This should always match the same-named field in configurationsAvailable.
schemaVersion¶
- IDL_Type
string
- Units
unitless
Description: Version of config schema used by the CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”. This should always match the same-named field in configurationsAvailable.
otherInfo¶
- IDL_Type
string
- Units
unitless
Description: A comma-separated list of event topics (without the logevent prefix) used to publish the entire set of configuration parameters loaded by the CSC, and any other pertinent information. Ignore whitespace after commas.
configurationsAvailable¶
Description: Information about the source of configuration information for the CSC.
- EFDB_Topic
SALGeneric_logevent_configurationsAvailable
- Category
configurable
overrides¶
- IDL_Type
string
- Units
unitless
Description: Available overrides as a comma-separated list. Each entry is a possible value of the configurationOverride field of the start command. Ignore whitespace after commas.
version¶
- IDL_Type
string
- Units
unitless
Description: Version of the configuration source. For a clone of a git repo it will be a git hash.
url¶
- IDL_Type
string
- Units
unitless
Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL.
schemaVersion¶
- IDL_Type
string
- Units
unitless
Description: Version of config schema used by the CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”.
errorCode¶
Description: Output when a CSC goes into the Fault state as an explanation of the problem.
- EFDB_Topic
SALGeneric_logevent_errorCode
- Category
csc
errorCode¶
- IDL_Type
long
- Units
unitless
Description: A numeric error code
errorReport¶
- IDL_Type
string
- Units
unitless
Description: An string providing detailed information about the error
traceback¶
- IDL_Type
string
- Units
unitless
Description: An optional stack trace of the error condition
heartbeat¶
- EFDB_Topic
SALGeneric_logevent_heartbeat
- Category
mandatory
heartbeat¶
- IDL_Type
boolean
- Units
unitless
Description: Beats the drum.
logLevel¶
Description: Current logging level.
- EFDB_Topic
SALGeneric_logevent_logLevel
- Category
mandatory
level¶
- IDL_Type
int
- Units
unitless
Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type
string
- Units
unitless
Description: If the CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to the CSC itself.
logMessage¶
Description: A log message.
- EFDB_Topic
SALGeneric_logevent_logMessage
- Category
mandatory
name¶
- IDL_Type
string
- Units
unitless
Description: Log name.
level¶
- IDL_Type
int
- Units
unitless
Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.
message¶
- IDL_Type
string
- Units
unitless
Description: Log message.
traceback¶
- IDL_Type
string
- Units
unitless
Description: Exception traceback; “” if not an exception.
filePath¶
- IDL_Type
string
- Units
unitless
Description: Path to source file.
functionName¶
- IDL_Type
string
- Units
unitless
Description: Function or method name.
lineNumber¶
- IDL_Type
long
- Units
unitless
Description: Line number in the file specified by filePath.
process¶
- IDL_Type
long
- Units
unitless
Description: Process ID.
timestamp¶
- IDL_Type
double
- Units
second
Description: The time at which the condition being reported was observed (TAI unix seconds). 0 if unspecified.
simulationMode¶
Description: Current simulation mode.
- EFDB_Topic
SALGeneric_logevent_simulationMode
- Category
csc
mode¶
- IDL_Type
int
- Units
unitless
Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.
softwareVersions¶
Description: Current versions of software in use by CSC.
- EFDB_Topic
SALGeneric_logevent_softwareVersions
- Category
mandatory
salVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of SAL generation
xmlVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of CSC XML
openSpliceVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of OpenSplice
cscVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the top-level version of the CSC
subsystemVersions¶
- IDL_Type
string
- Units
unitless
Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within a CSC
summaryState¶
Description: Current summary state of the CSC
- EFDB_Topic
SALGeneric_logevent_summaryState
- Category
csc
summaryState¶
- IDL_Type
long
- Units
unitless
Description: High level state machine state identifier
Telemetry¶
airPressure¶
- EFDB_Topic
WeatherStation_airPressure
paAvg1M¶
- IDL_Type
double
- Units
hPa
Description: 1 minute average value
patrValue3H¶
- IDL_Type
double
- Units
hPa
Description: Value for the last 3 hours for Air Pressure trend
pateValue3H¶
- IDL_Type
double
- Units
hPa
Description: Value for the last 3 hours for Air Pressure Tendency
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
airTemperature¶
- EFDB_Topic
WeatherStation_airTemperature
avg24H¶
- IDL_Type
double
- Units
deg_C
Description: 24 hours average
avg1M¶
- IDL_Type
double
- Units
deg_C
Description: 1 minute average value
max24H¶
- IDL_Type
double
- Units
deg_C
Description: Maximum value during the last 24 hours
min24H¶
- IDL_Type
double
- Units
deg_C
Description: Minimum value during the last 24 hours
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
dewPoint¶
- EFDB_Topic
WeatherStation_dewPoint
avg1M¶
- IDL_Type
double
- Units
deg_C
Description: 1 minute average value
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
precipitation¶
- EFDB_Topic
WeatherStation_precipitation
prSum1M¶
- IDL_Type
double
- Units
mm/h
Description: 1 minute sum value
prSum1H¶
- IDL_Type
double
- Units
mm/h
Description: 1 hour sum value
prfSum1M¶
- IDL_Type
double
- Units
mm/h
Description: 1 minute sum value for precipitation intensity
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
relativeHumidity¶
- EFDB_Topic
WeatherStation_relativeHumidity
avg24H¶
- IDL_Type
double
- Units
%
Description: 24 hours average
avg1M¶
- IDL_Type
double
- Units
%
Description: 1 minute average value
max24H¶
- IDL_Type
double
- Units
%
Description: Maximum value during the last 24 hours
min24H¶
- IDL_Type
double
- Units
%
Description: Minimum value during the last 24 hours
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
snowDepth¶
- EFDB_Topic
WeatherStation_snowDepth
avg1M¶
- IDL_Type
double
- Units
cm
Description: 1 minute average value
max24H¶
- IDL_Type
double
- Units
cm
Description: Maximum value during the last 24 hours
min24H¶
- IDL_Type
double
- Units
cm
Description: Minimum value during the last 24 hours
avg24H¶
- IDL_Type
double
- Units
cm
Description: 24 hours average
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
soilTemperature¶
- EFDB_Topic
WeatherStation_soilTemperature
avg24H¶
- IDL_Type
double
- Units
deg_C
Description: 24 hours average
avg1M¶
- IDL_Type
double
- Units
deg_C
Description: 1 minute average value
max24H¶
- IDL_Type
double
- Units
deg_C
Description: Maximum value during the last 24 hours
min24H¶
- IDL_Type
double
- Units
deg_C
Description: Minimum value during the last 24 hours
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
solarNetRadiation¶
- EFDB_Topic
WeatherStation_solarNetRadiation
avg1M¶
- IDL_Type
double
- Units
W/m2
Description: 1 minute average value
max24H¶
- IDL_Type
double
- Units
W/m2
Description: Maximum value during the last 24 hours
min24H¶
- IDL_Type
double
- Units
W/m2
Description: Minimum value during the last 24 hours
avg24H¶
- IDL_Type
double
- Units
W/m2
Description: 24 hours average
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
weather¶
- EFDB_Topic
WeatherStation_weather
ambient_temp¶
- IDL_Type
double
- Units
deg_C
Description: The ambient temperature.
humidity¶
- IDL_Type
double
- Units
%
Description: The humidity.
pressure¶
- IDL_Type
double
- Units
hPa
Description: The pressure outside.
windDirection¶
- EFDB_Topic
WeatherStation_windDirection
value¶
- IDL_Type
double
- Units
deg
Description: Instantaneous value
avg2M¶
- IDL_Type
double
- Units
deg
Description: 2 minutes average value
max2M¶
- IDL_Type
double
- Units
deg
Description: Maximum value during the last 2 minutes
min2M¶
- IDL_Type
double
- Units
deg
Description: Minimum value during the last 2 minutes
avg10M¶
- IDL_Type
double
- Units
deg
Description: 10 minutes average value
max10M¶
- IDL_Type
double
- Units
deg
Description: Maximum value during the last 10 minutes
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
windGustDirection¶
- EFDB_Topic
WeatherStation_windGustDirection
value10M¶
- IDL_Type
double
- Units
deg
Description: value for the last 10 minutes
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters
windSpeed¶
- EFDB_Topic
WeatherStation_windSpeed
value¶
- IDL_Type
double
- Units
m/s
Description: Instantaneous value
avg2M¶
- IDL_Type
double
- Units
m/s
Description: 2 minutes average value
max2M¶
- IDL_Type
double
- Units
m/s
Description: Maximum value during the last 2 minutes
min2M¶
- IDL_Type
double
- Units
m/s
Description: Minimum value during the last 2 minutes
avg10M¶
- IDL_Type
double
- Units
m/s
Description: 10 minutes average value
max10M¶
- IDL_Type
double
- Units
m/s
Description: Maximum value during the last 10 minutes
sensorName¶
- IDL_Type
string
- Units
unitless
Description: Sensor model used to measure this parameters