:tocdepth: 3 ############ ATPneumatics ############ .. note:: This page is generated by the following python script ``generate_cet.py``. :ref:`Back to table ` Commands -------- .. _ATPneumatics:Commands:closeInstrumentAirValve: closeInstrumentAirValve ~~~~~~~~~~~~~~~~~~~~~~~ **Description**: Closes air valve that provides positive pressure to instrument(s) :EFDB_Topic: ATPneumatics_command_closeInstrumentAirValve .. _ATPneumatics:Commands:closeInstrumentAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:closeM1CellVents: closeM1CellVents ~~~~~~~~~~~~~~~~ **Description**: Closes M1 cell vents :EFDB_Topic: ATPneumatics_command_closeM1CellVents .. _ATPneumatics:Commands:closeM1CellVents:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:closeM1Cover: closeM1Cover ~~~~~~~~~~~~ **Description**: Close the 4 petals of the M1 mirror cover :EFDB_Topic: ATPneumatics_command_closeM1Cover .. _ATPneumatics:Commands:closeM1Cover:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:closeMasterAirSupply: closeMasterAirSupply ~~~~~~~~~~~~~~~~~~~~ **Description**: Closes air valve from compressor and all air supply to telescope/instrument(s) :EFDB_Topic: ATPneumatics_command_closeMasterAirSupply .. _ATPneumatics:Commands:closeMasterAirSupply:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:m1CloseAirValve: m1CloseAirValve ~~~~~~~~~~~~~~~ **Description**: Closes the air valve to M1 mirror pneumatics. Pneumatics will slowly lose pressure. :EFDB_Topic: ATPneumatics_command_m1CloseAirValve .. _ATPneumatics:Commands:m1CloseAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:m1OpenAirValve: m1OpenAirValve ~~~~~~~~~~~~~~ **Description**: Opens air valve to M1 mirror pneumatics. Pneumatics will receive pressure given by m1SetPressure command :EFDB_Topic: ATPneumatics_command_m1OpenAirValve .. _ATPneumatics:Commands:m1OpenAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:m1SetPressure: m1SetPressure ~~~~~~~~~~~~~ **Description**: Set the desired air pressure for the M1 support system. :EFDB_Topic: ATPneumatics_command_m1SetPressure .. _ATPneumatics:Commands:m1SetPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Commanded M1 air pressure .. _ATPneumatics:Commands:m2CloseAirValve: m2CloseAirValve ~~~~~~~~~~~~~~~ **Description**: Closes air valve to M2 mirror pneumatic. (Hardware not functional, see DM-20577) :EFDB_Topic: ATPneumatics_command_m2CloseAirValve .. _ATPneumatics:Commands:m2CloseAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:m2OpenAirValve: m2OpenAirValve ~~~~~~~~~~~~~~ **Description**: Opens air valve to M2 mirror pneumatic (Hardware not functional, see DM-20577) :EFDB_Topic: ATPneumatics_command_m2OpenAirValve .. _ATPneumatics:Commands:m2OpenAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:m2SetPressure: m2SetPressure ~~~~~~~~~~~~~ **Description**: Set the desired air pressure for the M2 support system (Hardware not functional, see DM-20577) :EFDB_Topic: ATPneumatics_command_m2SetPressure .. _ATPneumatics:Commands:m2SetPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Commanded pressure for M2 support system (Hardware not functional, see DM-20577) .. _ATPneumatics:Commands:openInstrumentAirValve: openInstrumentAirValve ~~~~~~~~~~~~~~~~~~~~~~ **Description**: Opens air valve that provides positive pressure to instrument(s) :EFDB_Topic: ATPneumatics_command_openInstrumentAirValve .. _ATPneumatics:Commands:openInstrumentAirValve:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:openM1CellVents: openM1CellVents ~~~~~~~~~~~~~~~ :EFDB_Topic: ATPneumatics_command_openM1CellVents .. _ATPneumatics:Commands:openM1CellVents:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:openM1Cover: openM1Cover ~~~~~~~~~~~ **Description**: Open the M1 mirror covers. :EFDB_Topic: ATPneumatics_command_openM1Cover .. _ATPneumatics:Commands:openM1Cover:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. .. _ATPneumatics:Commands:openMasterAirSupply: openMasterAirSupply ~~~~~~~~~~~~~~~~~~~ **Description**: Opens master air supply valve that receives air from the compressor :EFDB_Topic: ATPneumatics_command_openMasterAirSupply .. _ATPneumatics:Commands:openMasterAirSupply:value: value ***** :IDL_Type: boolean :Units: dimensionless **Description**: Attribute required by the SAL API, but is unused. abort ~~~~~ :EFDB_Topic: SALGeneric_command_abort .. _ATPneumatics:abort:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used disable ~~~~~~~ **Description**: Transition from state Enabled to Disabled. :EFDB_Topic: SALGeneric_command_disable .. _ATPneumatics:disable:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used enable ~~~~~~ **Description**: Transition from state Disabled to Enabled. :EFDB_Topic: SALGeneric_command_enable .. _ATPneumatics:enable:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used enterControl ~~~~~~~~~~~~ **Description**: Transition from state Offline to Standby. Only "externally commandable" CSCs support this command; other CSCs start in Standby state and quit when they go to Offline. :EFDB_Topic: SALGeneric_command_enterControl .. _ATPneumatics:enterControl:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used exitControl ~~~~~~~~~~~ **Description**: Transition from state Standby to Offline. For CSCs that are not "externally commandable" this makes the CSC quit. :EFDB_Topic: SALGeneric_command_exitControl .. _ATPneumatics:exitControl:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used setAuthList ~~~~~~~~~~~ :EFDB_Topic: SALGeneric_command_setAuthList .. _ATPneumatics:setAuthList:authorizedUsers: authorizedUsers *************** :IDL_Type: string :Units: unitless **Description**: Comma seperated list of authorized users currently allowed to command this CSC, in the form user@host. If the first character is +/- then the specified users are added/removed. Duplicates are silently ignored. The CSC's own user@host is silently ignored, because it is always authorized. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma. .. _ATPneumatics:setAuthList:nonAuthorizedCSCs: nonAuthorizedCSCs ***************** :IDL_Type: string :Units: unitless **Description**: Comma seperated list of CSC's not currently allowed to command this CSC, in the form name[:index]. An index of 0 is stripped (name:0 becomes name). If the first character is +/- then the specified CSCs are added/removed. Duplicates are silently ignored. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma. setLogLevel ~~~~~~~~~~~ **Description**: Set the logging level. :EFDB_Topic: SALGeneric_command_setLogLevel .. _ATPneumatics:setLogLevel:level: level ***** :IDL_Type: int :Units: unitless **Description**: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10. setValue ~~~~~~~~ :EFDB_Topic: SALGeneric_command_setValue .. _ATPneumatics:setValue:parametersAndValues: parametersAndValues ******************* :IDL_Type: string :IDL_Size: 256 :Units: unitless **Description**: List of parameters and their values as a Json string standby ~~~~~~~ **Description**: Transition from state Offline, Disabled or Fault to Standby. :EFDB_Topic: SALGeneric_command_standby .. _ATPneumatics:standby:value: value ***** :IDL_Type: boolean :Units: unitless **Description**: Not used start ~~~~~ **Description**: Transition from state Standby to Disable, in a specified configuration. :EFDB_Topic: SALGeneric_command_start .. _ATPneumatics:start:settingsToApply: settingsToApply *************** :IDL_Type: string :IDL_Size: 256 :Units: unitless **Description**: Name of the selected settings set Enumerations ------------ :MirrorCoverState: * Closed * Opened * InMotion * Invalid :CellVentState: * CellVentsOpened * CellVentsClosed * InMotion :AirValveState: * ValveOpened * ValveClosed :VentsPosition: * Opened * Closed * PartiallyOpened Events ------ .. _ATPneumatics:Events:cellVentsState: cellVentsState ~~~~~~~~~~~~~~ **Description**: The substates of the cell vents: 1:CellVentState_CellVentsOpened, 2:CellVentState_CellVentsClosed, 3:CellVentState_InMotion :EFDB_Topic: ATPneumatics_logevent_cellVentsState .. _ATPneumatics:Events:cellVentsState:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: Substate of cell vents .. _ATPneumatics:Events:eStop: eStop ~~~~~ **Description**: Event is published if the Emergency Stop :EFDB_Topic: ATPneumatics_logevent_eStop .. _ATPneumatics:Events:eStop:triggered: triggered ********* :IDL_Type: boolean :Units: dimensionless **Description**: True if Emergency Stop .. _ATPneumatics:Events:instrumentState: instrumentState ~~~~~~~~~~~~~~~ **Description**: The substates of the instrument valve: 1:AirValveState_ValveOpened, 2:AirValveState_ValveClosed :EFDB_Topic: ATPneumatics_logevent_instrumentState .. _ATPneumatics:Events:instrumentState:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: Substate of instrument valve .. _ATPneumatics:Events:m1CoverLimitSwitches: m1CoverLimitSwitches ~~~~~~~~~~~~~~~~~~~~ **Description**: The state of each of the 4 M1 mirror cover petals :EFDB_Topic: ATPneumatics_logevent_m1CoverLimitSwitches .. _ATPneumatics:Events:m1CoverLimitSwitches:cover1ClosedActive: cover1ClosedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 1 closed .. _ATPneumatics:Events:m1CoverLimitSwitches:cover2ClosedActive: cover2ClosedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 2 closed .. _ATPneumatics:Events:m1CoverLimitSwitches:cover3ClosedActive: cover3ClosedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 3 closed .. _ATPneumatics:Events:m1CoverLimitSwitches:cover4ClosedActive: cover4ClosedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 4 closed .. _ATPneumatics:Events:m1CoverLimitSwitches:cover1OpenedActive: cover1OpenedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 1 open .. _ATPneumatics:Events:m1CoverLimitSwitches:cover2OpenedActive: cover2OpenedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 2 open .. _ATPneumatics:Events:m1CoverLimitSwitches:cover3OpenedActive: cover3OpenedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 3 open .. _ATPneumatics:Events:m1CoverLimitSwitches:cover4OpenedActive: cover4OpenedActive ****************** :IDL_Type: boolean :Units: dimensionless **Description**: True if cover/petal 4 open .. _ATPneumatics:Events:m1CoverState: m1CoverState ~~~~~~~~~~~~ **Description**: Substate of the M1 Mirror Covers. 1:MirrorCoverState_Closed, 2:MirrorCoverState_Opened, 3:MirrorCoverState_InMotion, 4:MirrorCoverState_Invalid :EFDB_Topic: ATPneumatics_logevent_m1CoverState .. _ATPneumatics:Events:m1CoverState:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: Current substate of the M1 Mirror Cover .. _ATPneumatics:Events:m1SetPressure: m1SetPressure ~~~~~~~~~~~~~ **Description**: Commanded air pressure for the M1 support system, as specified by the m1SetPressure command. Note that the measured pressure is reported in a telemetry topic. :EFDB_Topic: ATPneumatics_logevent_m1SetPressure .. _ATPneumatics:Events:m1SetPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Pressure to M1 pneumatic actuators .. _ATPneumatics:Events:m1State: m1State ~~~~~~~ **Description**: States of the M1 pneumatics value: 1:AirValveState_ValveOpened, 2:AirValveState_ValveClosed :EFDB_Topic: ATPneumatics_logevent_m1State .. _ATPneumatics:Events:m1State:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: The substate of the M1 pneumatics valve .. _ATPneumatics:Events:m1VentsLimitSwitches: m1VentsLimitSwitches ~~~~~~~~~~~~~~~~~~~~ **Description**: Indicates if M1 vents are open/closed. Note that only one of the ~8 vents has switches :EFDB_Topic: ATPneumatics_logevent_m1VentsLimitSwitches .. _ATPneumatics:Events:m1VentsLimitSwitches:ventsClosedActive: ventsClosedActive ***************** :IDL_Type: boolean :Units: dimensionless **Description**: True if M1 vents closed .. _ATPneumatics:Events:m1VentsLimitSwitches:ventsOpenedActive: ventsOpenedActive ***************** :IDL_Type: boolean :Units: dimensionless **Description**: True if M1 vents open .. _ATPneumatics:Events:m1VentsPosition: m1VentsPosition ~~~~~~~~~~~~~~~ **Description**: State of M1 vents: 1:VentsPosition_Opened, 2:VentsPosition_Closed, 3:VentsPosition_PartiallyOpened :EFDB_Topic: ATPneumatics_logevent_m1VentsPosition .. _ATPneumatics:Events:m1VentsPosition:position: position ******** :IDL_Type: long :Units: dimensionless **Description**: Substate of M1 vents .. _ATPneumatics:Events:m2SetPressure: m2SetPressure ~~~~~~~~~~~~~ **Description**: Commanded air pressure for the M2 support system, as specified by the m1SetPressure command (Hardware not functional, see DM-20577). Note that the measured pressure is reported in a telemetry topic. :EFDB_Topic: ATPneumatics_logevent_m2SetPressure .. _ATPneumatics:Events:m2SetPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Pressure to M2 mirror (Hardware not functional, see DM-20577). .. _ATPneumatics:Events:m2State: m2State ~~~~~~~ **Description**: The substates (enumeration) of the M2 valve: 1:AirValveState_ValveOpened, 2:AirValveState_ValveClosed :EFDB_Topic: ATPneumatics_logevent_m2State .. _ATPneumatics:Events:m2State:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: Enumerations (substates): 1:AirValveState_ValveOpened, 2:AirValveState_ValveClosed .. _ATPneumatics:Events:mainValveState: mainValveState ~~~~~~~~~~~~~~ **Description**: The substates of the main air valve: 1:AirValveState_ValveOpened, 2:AirValveState_ValveClosed :EFDB_Topic: ATPneumatics_logevent_mainValveState .. _ATPneumatics:Events:mainValveState:state: state ***** :IDL_Type: long :Units: dimensionless **Description**: Substate of main air valve .. _ATPneumatics:Events:powerStatus: powerStatus ~~~~~~~~~~~ **Description**: State of circuit breakers for ATMCS drives. :EFDB_Topic: ATPneumatics_logevent_powerStatus .. _ATPneumatics:Events:powerStatus:powerOnL1: powerOnL1 ********* :IDL_Type: boolean :Units: dimensionless **Description**: Status Power line 1, Azimuth motors 1 and 2 .. _ATPneumatics:Events:powerStatus:powerOnL2: powerOnL2 ********* :IDL_Type: boolean :Units: dimensionless **Description**: Status Power line 2, Elevation and M3 rotator .. _ATPneumatics:Events:powerStatus:powerOnL3: powerOnL3 ********* :IDL_Type: boolean :Units: dimensionless **Description**: Status Power line 3, Nasmyth ports 1 and 2 appliedSettingsMatchStart ~~~~~~~~~~~~~~~~~~~~~~~~~ :EFDB_Topic: SALGeneric_logevent_appliedSettingsMatchStart .. _ATPneumatics:appliedSettingsMatchStart:appliedSettingsMatchStartIsTrue: appliedSettingsMatchStartIsTrue ******************************* :IDL_Type: boolean :Units: unitless **Description**: True when the configuration matches the start conditions authList ~~~~~~~~ :EFDB_Topic: SALGeneric_logevent_authList .. _ATPneumatics:authList:authorizedUsers: authorizedUsers *************** :IDL_Type: string :Units: unitless **Description**: Comma seperated list of authorized users currently allowed to command this CSC. .. _ATPneumatics:authList:nonAuthorizedCSCs: nonAuthorizedCSCs ***************** :IDL_Type: string :Units: unitless **Description**: Comma seperated list of CSC's not currently allowed to command this CSC. errorCode ~~~~~~~~~ **Description**: Output when a CSC goes into the Fault state as an explanation of the problem. :EFDB_Topic: SALGeneric_logevent_errorCode .. _ATPneumatics:errorCode:errorCode: errorCode ********* :IDL_Type: long :Units: unitless **Description**: A numeric error code .. _ATPneumatics:errorCode:errorReport: errorReport *********** :IDL_Type: string :Units: unitless **Description**: An string providing detailed information about the error .. _ATPneumatics:errorCode:traceback: traceback ********* :IDL_Type: string :Units: unitless **Description**: An optional stack trace of the error condition heartbeat ~~~~~~~~~ :EFDB_Topic: SALGeneric_logevent_heartbeat .. _ATPneumatics:heartbeat:heartbeat: heartbeat ********* :IDL_Type: boolean :Units: unitless **Description**: Beats the drum. logLevel ~~~~~~~~ **Description**: Current logging level. :EFDB_Topic: SALGeneric_logevent_logLevel .. _ATPneumatics:logLevel:level: level ***** :IDL_Type: int :Units: unitless **Description**: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10. logMessage ~~~~~~~~~~ **Description**: A log message. :EFDB_Topic: SALGeneric_logevent_logMessage .. _ATPneumatics:logMessage:name: name **** :IDL_Type: string :Units: unitless **Description**: Log name. .. _ATPneumatics:logMessage:level: level ***** :IDL_Type: int :Units: unitless **Description**: Message level, a Python logging level: error=40, warning=30, info=20, debug=10. .. _ATPneumatics:logMessage:message: message ******* :IDL_Type: string :Units: unitless **Description**: Log message. .. _ATPneumatics:logMessage:traceback: traceback ********* :IDL_Type: string :Units: unitless **Description**: Exception traceback; "" if not an exception. .. _ATPneumatics:logMessage:filePath: filePath ******** :IDL_Type: string :Units: unitless **Description**: Path to source file. .. _ATPneumatics:logMessage:functionName: functionName ************ :IDL_Type: string :Units: unitless **Description**: Function or method name. .. _ATPneumatics:logMessage:lineNumber: lineNumber ********** :IDL_Type: long :Units: unitless **Description**: Line number in the file specified by filePath. .. _ATPneumatics:logMessage:process: process ******* :IDL_Type: long :Units: unitless **Description**: Process ID. settingVersions ~~~~~~~~~~~~~~~ **Description**: Information about settings which can be specified in the start command. :EFDB_Topic: SALGeneric_logevent_settingVersions .. _ATPneumatics:settingVersions:recommendedSettingsVersion: recommendedSettingsVersion ************************** :IDL_Type: string :Units: unitless **Description**: List of comma seperated recomended versions of settings sets .. _ATPneumatics:settingVersions:recommendedSettingsLabels: recommendedSettingsLabels ************************* :IDL_Type: string :Units: unitless **Description**: List of comma seperated names of settings sets .. _ATPneumatics:settingVersions:settingsUrl: settingsUrl *********** :IDL_Type: string :Units: unitless **Description**: The URL where the settings sets definitions can be found settingsApplied ~~~~~~~~~~~~~~~ **Description**: Base settings applied. :EFDB_Topic: SALGeneric_logevent_settingsApplied .. _ATPneumatics:settingsApplied:settingsVersion: settingsVersion *************** :IDL_Type: string :IDL_Size: 256 :Units: unitless **Description**: The SHA or name corresponding to the published configuration .. _ATPneumatics:settingsApplied:otherSettingsEvents: otherSettingsEvents ******************* :IDL_Type: string :Units: unitless **Description**: A comma delimited list of other specific CSC configuration events. This may be blank if no other CSC specific events are necessary simulationMode ~~~~~~~~~~~~~~ **Description**: Current simulation mode. :EFDB_Topic: SALGeneric_logevent_simulationMode .. _ATPneumatics:simulationMode:mode: mode **** :IDL_Type: int :Units: unitless **Description**: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC. softwareVersions ~~~~~~~~~~~~~~~~ **Description**: Current versions of software in use by CSC. :EFDB_Topic: SALGeneric_logevent_softwareVersions .. _ATPneumatics:softwareVersions:salVersion: salVersion ********** :IDL_Type: string :IDL_Size: 16 :Units: unitless **Description**: This is the current version of SAL generation .. _ATPneumatics:softwareVersions:xmlVersion: xmlVersion ********** :IDL_Type: string :IDL_Size: 16 :Units: unitless **Description**: This is the current version of CSC XML .. _ATPneumatics:softwareVersions:openSpliceVersion: openSpliceVersion ***************** :IDL_Type: string :IDL_Size: 16 :Units: unitless **Description**: This is the current version of OpenSplice .. _ATPneumatics:softwareVersions:cscVersion: cscVersion ********** :IDL_Type: string :IDL_Size: 16 :Units: unitless **Description**: This is the top-level version of the CSC .. _ATPneumatics:softwareVersions:subsystemVersions: subsystemVersions ***************** :IDL_Type: string :Units: unitless **Description**: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within a CSC summaryState ~~~~~~~~~~~~ **Description**: Current summary state of the CSC :EFDB_Topic: SALGeneric_logevent_summaryState .. _ATPneumatics:summaryState:summaryState: summaryState ************ :IDL_Type: long :Units: unitless **Description**: High level state machine state identifier Telemetry --------- .. _ATPneumatics:Telemetry:loadCell: loadCell ~~~~~~~~ **Description**: Load cell value (from M1 hardpoint) :EFDB_Topic: ATPneumatics_loadCell .. _ATPneumatics:Telemetry:loadCell:cellLoad: cellLoad ******** :IDL_Type: double :Units: kg **Description**: Load cell measurement .. _ATPneumatics:Telemetry:m1AirPressure: m1AirPressure ~~~~~~~~~~~~~ **Description**: Measured pressure in air line to M1 pneumatic actuators :EFDB_Topic: ATPneumatics_m1AirPressure .. _ATPneumatics:Telemetry:m1AirPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Measured pressure of M1 air line .. _ATPneumatics:Telemetry:m2AirPressure: m2AirPressure ~~~~~~~~~~~~~ **Description**: Measured pressure of airline to M2 pneumatic actuator (Hardware not functional, see DM-20577) :EFDB_Topic: ATPneumatics_m2AirPressure .. _ATPneumatics:Telemetry:m2AirPressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Measured pressure of M2 air line .. _ATPneumatics:Telemetry:mainAirSourcePressure: mainAirSourcePressure ~~~~~~~~~~~~~~~~~~~~~ **Description**: Measured pressure in main supply line from compressor :EFDB_Topic: ATPneumatics_mainAirSourcePressure .. _ATPneumatics:Telemetry:mainAirSourcePressure:pressure: pressure ******** :IDL_Type: double :Units: Pa **Description**: Measured pressure of main air supply line