MTM1M3TS¶

Note

This page is generated by python script generate_cet.py.

Commands¶

applySetpoint¶

EFDB_Topic:	MTM1M3TS_command_applySetpoint

setpoint¶

IDL_Type:	float
Units:	deg_C

Description: Temperature setpoint to apply

heaterFanDemand¶

Description: Sets thermal unit heater PWM and fan RPM demand values. Command code 88 (0x58).

EFDB_Topic:	MTM1M3TS_command_heaterFanDemand

heaterPWM¶

IDL_Type:	byte
Units:	unitless
Count:	96

Description: Heater PWM demand. 0-255, where 255 equals 100%.

fanRPM¶

IDL_Type:	byte
Units:	unitless
Count:	96

Description: Fan RPM demand value. 0-255, where 255 equals 2550 RPM.

power¶

Description: Turn power on for fail/heaters coils and coolant pump. Controls cRIO slot 5 SSR.

EFDB_Topic:	MTM1M3TS_command_power

fanCoilsHeaters¶

IDL_Type:	boolean
Units:	unitless

Description: Apply power to Dan Coils/Heaters. true=on, false=off.

coolantPump¶

IDL_Type:	boolean
Units:	unitless

Description: Apply power to coolant pump, true=on, false=off.

reset¶

Description: Reset given ILC. Needed to apply new Re-Heater Gains. Command code 107 (0x6B).

EFDB_Topic:	MTM1M3TS_command_reset

units¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Array of ILCs to reset.

setReHeaterGains¶

Description: Thermal ILC Re-Heater PI (Proportional and Integral gain) values. Command code 92 (0x5C).

EFDB_Topic:	MTM1M3TS_command_setReHeaterGains

proportionalGain¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Re-Heater proportional gain.

integralGain¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Re-Heater integral gain.

abort¶

EFDB_Topic:	SALGeneric_command_abort

disable¶

Description: Transition from state Enabled to Disabled.

EFDB_Topic:	SALGeneric_command_disable

enable¶

Description: Transition from state Disabled to Enabled.

EFDB_Topic:	SALGeneric_command_enable

enterControl¶

Description: Transition from state Offline to Standby. Only that start in Offline state CSCs support this command; other CSCs start in Standby state and quit when they go to Offline.

EFDB_Topic:	SALGeneric_command_enterControl

exitControl¶

Description: Transition from state Standby to Offline. For CSCs that start in Standby state this makes the CSC quit. CSCs that start in Offline state, they remain active.

EFDB_Topic:	SALGeneric_command_exitControl

setAuthList¶

EFDB_Topic:	SALGeneric_command_setAuthList

authorizedUsers¶

IDL_Type:	string
Units:	unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC,: in the form user@host. If the first character is +/- then the specified users are added/removed. Duplicates are silently ignored. The CSC’s own user@host is silently ignored, because it is always authorized. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

nonAuthorizedCSCs¶

IDL_Type:	string
Units:	unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC,: in the form name[:index]. An index of 0 is stripped (name:0 becomes name). If the first character is +/- then the specified CSCs are added/removed. Duplicates are silently ignored. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

setLogLevel¶

Description: Set the logging level.

EFDB_Topic:	SALGeneric_command_setLogLevel

level¶

IDL_Type:	int
Units:	unitless

Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.

setValue¶

EFDB_Topic:	SALGeneric_command_setValue

parametersAndValues¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: List of parameters and their values as a Json string

standby¶

Description: Transition from state Offline, Disabled or Fault to Standby.

EFDB_Topic:	SALGeneric_command_standby

start¶

Description: Transition from state Standby to Disable, in a specified configuration.

EFDB_Topic:	SALGeneric_command_start

settingsToApply¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: Name of the selected settings set

Enumerations¶

ILCType:	ElectromechanicalActuator=1 PneumaticActuator=2 Thermal=3 HardpointMonitoring=7 Bootloader=10

Events¶

appliedSetpoint¶

EFDB_Topic:	MTM1M3TS_logevent_appliedSetpoint

setpoint¶

IDL_Type:	float
Units:	deg_C

Description: Applied setpoint.

powerStatus¶

EFDB_Topic:	MTM1M3TS_logevent_powerStatus

fanCoilsHeatersCommandedOn¶

IDL_Type:	boolean
Units:	unitless

Description: True if Fan Coils/Heaters power bus commanded on.

fanCoilsHeatersOn¶

IDL_Type:	boolean
Units:	unitless

Description: True if Fan Coils/Heaters are on.

coolantPumpCommandedOn¶

IDL_Type:	boolean
Units:	unitless

Description: True if Coolant Pump commanded on.

coolantPumpOn¶

IDL_Type:	boolean
Units:	unitless

Description: True if Coolant Pump is on.

reHeaterGains¶

EFDB_Topic:	MTM1M3TS_logevent_reHeaterGains

proportionalGain¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Re-Heater proportional gain.

integralGain¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Re-Heater integral gain.

thermalInfo¶

EFDB_Topic:	MTM1M3TS_logevent_thermalInfo

referenceId¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC reference id.

modbusAddress¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC modbus address.

xPosition¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Fan x position.

yPosition¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Fan y position.

zPosition¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Fan z position.

ilcUniqueId¶

IDL_Type:	long long
Units:	unitless
Count:	96

Description: Thermal ILC unique id.

ilcApplicationType¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC application type. ILCType enumeration.

networkNodeType¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC network node type. ILCType enumeration. Mismatch with ilcApplicationType indicates ILC programming/seting problem.

majorRevision¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC major revision.

minorRevision¶

IDL_Type:	short
Units:	unitless
Count:	96

Description: Thermal ILC minor revision.

thermalWarning¶

EFDB_Topic:	MTM1M3TS_logevent_thermalWarning

anyWarning¶

IDL_Type:	boolean
Units:	unitless

Description: Does at least a single thermal fan unit indicates any warning?

anyMajorFault¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Major Fault.

majorFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning major Fault.

anyMinorFault¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Minor Fault.

minorFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning minor Fault.

anyFaultOverride¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Fault Override.

faultOverride¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning fault Override.

anyRefResistorError¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit any Ref Resistor Error.

refResistorError¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit Ref Resistor Error.

anyRTDError¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit any RTD Error.

rtdError¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit RTD Error.

anyBreakerHeater1Error¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit any Breaker Heater 1 Error.

breakerHeater1Error¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit Breaker Heater 1 Error.

anyBreakerFan2Error¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit any Breaker Fan 2 Error.

breakerFan2Error¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit Breaker Fan 2 Error.

anyUniqueIdCRCError¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Unique Id CRC Error.

uniqueIdCRCError¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning unique Id CRC Error.

anyApplicationTypeMismatch¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Application Type Mismatch.

applicationTypeMismatch¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning application Type Mismatch.

anyApplicationMissing¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Application Missing.

applicationMissing¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning application Missing.

anyApplicationCRCMismatch¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Application CRC Mismatch.

applicationCRCMismatch¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning application CRC Mismatch.

anyOneWireMissing¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any OneWire Missing.

oneWireMissing¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning oneWire Missing.

anyOneWire1Mismatch¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any OneWire1 Mismatch.

oneWire1Mismatch¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning oneWire1 Mismatch.

anyOneWire2Mismatch¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any OneWire2 Mismatch.

oneWire2Mismatch¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning oneWire2 Mismatch.

anyWatchdogReset¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Watchdog Rese.

watchdogReset¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning watchdog Reset.

anyBrownOut¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Brownout.

brownOut¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning brownout.

anyEventTrapReset¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Event Trap Reset.

eventTrapReset¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning event Trap Reset.

anySSRPowerFault¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any SSR Power Fault.

ssrPowerFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning SSR Power Fault.

anyAuxPowerFault¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Aux Power Fault.

auxPowerFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning aux Power Fault.

anyILCFault¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any ILC Fault.

ilcFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Force actuator warning ILC Fault.

anyBroadcastCounterWarning¶

IDL_Type:	boolean
Units:	unitless

Description: Thermal fan unit warning any Broadcast Counter Warning.

broadcastCounterWarning¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Thermal fan unit warning broadcast Counter Warning.

appliedSettingsMatchStart¶

EFDB_Topic:	SALGeneric_logevent_appliedSettingsMatchStart

appliedSettingsMatchStartIsTrue¶

IDL_Type:	boolean
Units:	unitless

Description: True when the configuration matches the start conditions

authList¶

EFDB_Topic:	SALGeneric_logevent_authList

authorizedUsers¶

IDL_Type:	string
Units:	unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC.

nonAuthorizedCSCs¶

IDL_Type:	string
Units:	unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC.

errorCode¶

Description: Output when a CSC goes into the Fault state as an explanation of the problem.

EFDB_Topic:	SALGeneric_logevent_errorCode

errorCode¶

IDL_Type:	long
Units:	unitless

Description: A numeric error code

errorReport¶

IDL_Type:	string
Units:	unitless

Description: An string providing detailed information about the error

traceback¶

IDL_Type:	string
Units:	unitless

Description: An optional stack trace of the error condition

heartbeat¶

EFDB_Topic:	SALGeneric_logevent_heartbeat

heartbeat¶

IDL_Type:	boolean
Units:	unitless

Description: Beats the drum.

logLevel¶

Description: Current logging level.

EFDB_Topic:	SALGeneric_logevent_logLevel

level¶

IDL_Type:	int
Units:	unitless

Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.

logMessage¶

Description: A log message.

EFDB_Topic:	SALGeneric_logevent_logMessage

name¶

IDL_Type:	string
Units:	unitless

Description: Log name.

level¶

IDL_Type:	int
Units:	unitless

Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.

message¶

IDL_Type:	string
Units:	unitless

Description: Log message.

traceback¶

IDL_Type:	string
Units:	unitless

Description: Exception traceback; “” if not an exception.

filePath¶

IDL_Type:	string
Units:	unitless

Description: Path to source file.

functionName¶

IDL_Type:	string
Units:	unitless

Description: Function or method name.

lineNumber¶

IDL_Type:	long
Units:	unitless

Description: Line number in the file specified by filePath.

process¶

IDL_Type:	long
Units:	unitless

Description: Process ID.

settingVersions¶

Description: Information about settings which can be specified in the start command.

EFDB_Topic:	SALGeneric_logevent_settingVersions

recommendedSettingsVersion¶

IDL_Type:	string
Units:	unitless

Description: List of comma seperated recomended versions of settings sets

recommendedSettingsLabels¶

IDL_Type:	string
Units:	unitless

Description: List of comma seperated names of settings sets

settingsUrl¶

IDL_Type:	string
Units:	unitless

Description: The URL where the settings sets definitions can be found

settingsApplied¶

Description: Base settings applied.

EFDB_Topic:	SALGeneric_logevent_settingsApplied

settingsVersion¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: The SHA or name corresponding to the published configuration

otherSettingsEvents¶

IDL_Type:	string
Units:	unitless

Description: A comma delimited list of other specific CSC configuration events. This may be blank if no other CSC specific events are necessary

simulationMode¶

Description: Current simulation mode.

EFDB_Topic:	SALGeneric_logevent_simulationMode

mode¶

IDL_Type:	int
Units:	unitless

Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.

softwareVersions¶

Description: Current versions of software in use by CSC.

EFDB_Topic:	SALGeneric_logevent_softwareVersions

salVersion¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: This is the current version of SAL generation

xmlVersion¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: This is the current version of CSC XML

openSpliceVersion¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: This is the current version of OpenSplice

cscVersion¶

IDL_Type:	string
IDL_Size:	256
Units:	unitless

Description: This is the top-level version of the CSC

subsystemVersions¶

IDL_Type:	string
Units:	unitless

Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within a CSC

summaryState¶

Description: Current summary state of the CSC

EFDB_Topic:	SALGeneric_logevent_summaryState

summaryState¶

IDL_Type:	long
Units:	unitless

Description: High level state machine state identifier

Telemetry¶

thermalData¶

Description: Thermal status response data. Return of ILC command 89 (0x59).

EFDB_Topic:	MTM1M3TS_thermalData

timestamp¶

IDL_Type:	double
Units:	second

Description: Timestamp the data was generated (TAI unix seconds).

ilcFault¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: ILC Fault.

heaterDisabled¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Heater disabled.

heaterBreaker¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Heater circuit breaker (false=closed/OK, true=open/tripped).

fanBreaker¶

IDL_Type:	boolean
Units:	unitless
Count:	96

Description: Fan circuit breaker (false=closed/OK, true=open/tripped).

differentialTemperature¶

IDL_Type:	float
Units:	deg_C
Count:	96

Description: Differential temperature.

fanRPM¶

IDL_Type:	float
Units:	unitless
Count:	96

Description: Measured fan RPM-0 to 2550 RPM.

absoluteTemperature¶

IDL_Type:	float
Units:	deg_C
Count:	96

Description: Absolute temperature.

Navigation

MTM1M3TS¶

Commands¶

applySetpoint¶

setpoint¶

heaterFanDemand¶

heaterPWM¶

fanRPM¶

power¶

fanCoilsHeaters¶

coolantPump¶

reset¶

units¶

setReHeaterGains¶

proportionalGain¶

integralGain¶

abort¶

disable¶

enable¶

enterControl¶

exitControl¶

setAuthList¶

authorizedUsers¶

nonAuthorizedCSCs¶

setLogLevel¶

level¶

setValue¶

parametersAndValues¶

standby¶

start¶

settingsToApply¶

Enumerations¶

Events¶

appliedSetpoint¶

setpoint¶

powerStatus¶

fanCoilsHeatersCommandedOn¶

fanCoilsHeatersOn¶

coolantPumpCommandedOn¶

coolantPumpOn¶

reHeaterGains¶

proportionalGain¶

integralGain¶

thermalInfo¶

referenceId¶

modbusAddress¶

xPosition¶

yPosition¶

zPosition¶

ilcUniqueId¶

ilcApplicationType¶

networkNodeType¶

majorRevision¶

minorRevision¶

thermalWarning¶

anyWarning¶

anyMajorFault¶

majorFault¶

anyMinorFault¶

minorFault¶

anyFaultOverride¶

faultOverride¶

anyRefResistorError¶

refResistorError¶

anyRTDError¶

rtdError¶

anyBreakerHeater1Error¶

breakerHeater1Error¶

anyBreakerFan2Error¶

breakerFan2Error¶

anyUniqueIdCRCError¶

uniqueIdCRCError¶

anyApplicationTypeMismatch¶

applicationTypeMismatch¶

anyApplicationMissing¶

applicationMissing¶

anyApplicationCRCMismatch¶

applicationCRCMismatch¶

anyOneWireMissing¶

oneWireMissing¶