ATDome

Note

This page is generated by python script generate_cet.py.

Back to table

Commands

closeShutter

Description: Close both shutter doors. This is the preferred way to close the shutter, because it automatically sequences the doors to prevent the main door from interfering with the dropout door.

EFDB_Topic

ATDome_command_closeShutter

homeAzimuth

Description: Home the azimuth axis.

EFDB_Topic

ATDome_command_homeAzimuth

moveAzimuth

Description: Rotate the dome to the specified azimuth.

EFDB_Topic

ATDome_command_moveAzimuth

azimuth

IDL_Type

float

Units

deg

Description: Desired azimuth. The dome will take the shortest route to the specified position (it has no azimuth rotation limits).

moveShutterDropoutDoor

Description: Open or close the shutter dropout door. Intended for engineering; use the openShutter and closeShutter commands for normal operation since they automatically sequence the doors to prevent the main door from interfering with the dropout door.

EFDB_Topic

ATDome_command_moveShutterDropoutDoor

open

IDL_Type

boolean

Units

unitless

Description: Open the door if true, close it if false.

moveShutterMainDoor

Description: Open or close the main shutter door. Intended for engineering; use the openShutter and closeShutter commands for normal operation since they automatically sequence the doors to prevent the main door from interfering with the dropout.

EFDB_Topic

ATDome_command_moveShutterMainDoor

open

IDL_Type

boolean

Units

unitless

Description: Open the door if true, close it if false.

openShutter

Description: Open both shutter doors. This is the preferred way to open the shutter because it automatically sequences the doors to prevent the main door from interfering with the dropout door.

EFDB_Topic

ATDome_command_openShutter

stopMotion

Description: Stop all motion: azimuth, dropout door and main door.

EFDB_Topic

ATDome_command_stopMotion

disable

Description: Transition from state Enabled to Disabled.

EFDB_Topic

SALGeneric_command_disable

Category

csc

enable

Description: Transition from state Disabled to Enabled.

EFDB_Topic

SALGeneric_command_enable

Category

csc

exitControl

Description: Transition from state Standby to Offline. For CSCs that start in Standby state this makes the CSC quit. CSCs that start in Offline state, they remain active.

EFDB_Topic

SALGeneric_command_exitControl

Category

csc

setAuthList

EFDB_Topic

SALGeneric_command_setAuthList

Category

csc

authorizedUsers

IDL_Type

string

Units

unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC,

in the form user@host. If the first character is +/- then the specified users are added/removed. Duplicates are silently ignored. The CSC’s own user@host is silently ignored, because it is always authorized. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

nonAuthorizedCSCs

IDL_Type

string

Units

unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC,

in the form name[:index]. An index of 0 is stripped (name:0 becomes name). If the first character is +/- then the specified CSCs are added/removed. Duplicates are silently ignored. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

setLogLevel

Description: Set the logging level.

EFDB_Topic

SALGeneric_command_setLogLevel

Category

csc

level

IDL_Type

int

Units

unitless

Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.

subsystem

IDL_Type

string

Units

unitless

Description: Subsystem this applies to. If empty, the change applies to all subsystems. Beyond that, the meaning depends on the CSC.

standby

Description: Transition from state Offline, Disabled or Fault to Standby.

EFDB_Topic

SALGeneric_command_standby

Category

csc

start

Description: Transition from state Standby to Disable, in a specified configuration.

EFDB_Topic

SALGeneric_command_start

Category

csc

settingsToApply

IDL_Type

string

IDL_Size

256

Units

unitless

Description: Name of the selected settings set

Enumerations

AzimuthCommandedState
AzimuthState
ShutterDoorCommandedState
ShutterDoorState

Events

allAxesInPosition

Description: Are all axes (azimuth and both shutter doors) in position?

EFDB_Topic

ATDome_logevent_allAxesInPosition

inPosition

IDL_Type

boolean

Units

unitless

Description: In position?

azimuthCommandedState

Description: Commanded state of azimuth drive.

EFDB_Topic

ATDome_logevent_azimuthCommandedState

commandedState

IDL_Type

long

Units

unitless

Description: Commanded state. An AzimuthCommandedState enumeration.

azimuth

IDL_Type

float

Units

deg

Description: Position commanded by the most recent moveAzimuth command; nan when the CSC starts up or when homing.

azimuthInPosition

Description: Is the dome azimuth in the commanded position? Note: this will be false when the CSC starts up until a position is commanded.

EFDB_Topic

ATDome_logevent_azimuthInPosition

inPosition

IDL_Type

boolean

Units

unitless

Description: In position?

azimuthState

Description: Current state of azimuth drive.

EFDB_Topic

ATDome_logevent_azimuthState

state

IDL_Type

long

Units

unitless

Description: Current state. An AzimuthState enumeration.

homing

IDL_Type

boolean

Units

unitless

Description: Is azimuth being homed?

homed

IDL_Type

boolean

Units

unitless

Description: Has azimuth been homed since the CSC was started?

homeSwitch

IDL_Type

boolean

Units

unitless

Description: Is the azimuth home switch depressed? Note that it may not be depressed when homing is done.

doorEncoderExtremes

Description: Encoder values of the doors when fully closed or fully opened. Reported in full status as Main Door Encoder Closed, etc.

EFDB_Topic

ATDome_logevent_doorEncoderExtremes

mainClosed

IDL_Type

long long

Units

unitless

Description: Encoder position for main door when fully closed.

mainOpened

IDL_Type

long long

Units

unitless

Description: Encoder position for main door when fully opened.

dropoutClosed

IDL_Type

long long

Units

unitless

Description: Encoder position for dropout door when fully closed.

dropoutOpened

IDL_Type

long long

Units

unitless

Description: Encoder position for dropout door when fully opened.

dropoutDoorCommandedState

Description: Commanded state of the dropout shutter door.

EFDB_Topic

ATDome_logevent_dropoutDoorCommandedState

commandedState

IDL_Type

long

Units

unitless

Description: Commanded state. A ShutterDoorCommandedState enumeration.

dropoutDoorState

Description: Current state of the dropout shutter door.

EFDB_Topic

ATDome_logevent_dropoutDoorState

state

IDL_Type

long

Units

unitless

Description: Current state. A ShutterDoorState enumeration.

emergencyStop

Description: Has the emergency stop button been activated?

EFDB_Topic

ATDome_logevent_emergencyStop

active

IDL_Type

boolean

Units

unitless

Description: Is the estop active (e.g. estop button pressed)?

lastAzimuthGoTo

Description: The most recently commanded azimuth position.

EFDB_Topic

ATDome_logevent_lastAzimuthGoTo

position

IDL_Type

float

Units

deg

Description: Reported position.

mainDoorCommandedState

Description: Commanded state of the main shutter door.

EFDB_Topic

ATDome_logevent_mainDoorCommandedState

commandedState

IDL_Type

long

Units

unitless

Description: Commanded state. A ShutterDoorCommandedState enumeration.

mainDoorState

Description: Current state of the main shutter door.

EFDB_Topic

ATDome_logevent_mainDoorState

state

IDL_Type

long

Units

unitless

Description: Current state. A ShutterDoorState enumeration.

moveCode

Description: Move code bitmask reported by the low-level controller. This is an internal detail that is published primarily for diagnosing problems; please do not rely on it. The component values are: 1 moving azimuth +, 2 moving azimuth -, 4 closing main door, 8 opening main door, 16 closing dropout door, 32 opening dropout, 64 homing, 128 emergency stop.

EFDB_Topic

ATDome_logevent_moveCode

code

IDL_Type

long

Units

unitless

Description: The move code.

settingsAppliedDomeController

Description: Settings internal to the ATDome TCP/IP controller.

EFDB_Topic

ATDome_logevent_settingsAppliedDomeController

rainSensorEnabled

IDL_Type

boolean

Units

unitless

Description: Is the rain/snow sensor enabled?

cloudSensorEnabled

IDL_Type

boolean

Units

unitless

Description: Is the cloud sensor enabled?

tolerance

IDL_Type

float

Units

deg

Description: A request to move less than this amount in azimuth is ignored.

homeAzimuth

IDL_Type

float

Units

deg

Description: Azimuth position of the home switch.

highSpeedDistance

IDL_Type

float

Units

deg

Description: The minimum distance in azimuth that the dome must move to invoke high speed motion.

watchdogTimer

IDL_Type

float

Units

second

Description: The time interval between loss of communication between the shutter control box (SCB) and main control box (MCB) and the SCB closing the shutter.

dropoutTimer

IDL_Type

float

Units

second

Description: What is this? How does it differ from doorMoveTimeout?

reversalDelay

IDL_Type

float

Units

second

Description: The delay between reversing motor directions for the shutter doors, where 0 < t <= 6. For a 240 VAC system this parameter can be set to 0.

autoShutdownEnabled

IDL_Type

boolean

Units

unitless

Description: Is automatic closing of the shutter enabled? If enabled then the shutter will be closed if rain, snow or clouds are detected, or if the shutter control box (SCB) loses radio contact with the main control box (MCB).

coast

IDL_Type

float

Units

deg

Description: Azimuth coasting distance.

encoderCountsPer360

IDL_Type

long long

Units

unitless

Description: Number of azimuth encoder counts per full rotation.

azimuthMoveTimeout

IDL_Type

float

Units

second

Description: Timeout for azimuth moves.

doorMoveTimeout

IDL_Type

float

Units

second

Description: Timeout for opening or closing (what? either shutter door?).

settingsAppliedDomeTcp

Description: Settings related to communication between the ATDome CSC and the ATDome TCP/IP controller.

EFDB_Topic

ATDome_logevent_settingsAppliedDomeTcp

host

IDL_Type

string

Units

unitless

Description: Host name of the ATDome TCP/IP controller.

port

IDL_Type

long

Units

unitless

Description: Port number of the ATDome TCP/IP controller.

readTimeout

IDL_Type

float

Units

second

Description: Read timeout before going into a fault state.

connectionTimeout

IDL_Type

float

Units

second

Description: Connection timeout before going into a fault state.

shutterInPosition

Description: Are the shutter doors in their commanded positions? Note: this will be false when the CSC starts up until a position is commanded for both doors.

EFDB_Topic

ATDome_logevent_shutterInPosition

inPosition

IDL_Type

boolean

Units

unitless

Description: In position?

appliedSettingsMatchStart

EFDB_Topic

SALGeneric_logevent_appliedSettingsMatchStart

Category

configurable

appliedSettingsMatchStartIsTrue

IDL_Type

boolean

Units

unitless

Description: True when the configuration matches the start conditions

authList

EFDB_Topic

SALGeneric_logevent_authList

Category

csc

authorizedUsers

IDL_Type

string

Units

unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC.

nonAuthorizedCSCs

IDL_Type

string

Units

unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC.

errorCode

Description: Output when a CSC goes into the Fault state as an explanation of the problem.

EFDB_Topic

SALGeneric_logevent_errorCode

Category

csc

errorCode

IDL_Type

long

Units

unitless

Description: A numeric error code

errorReport

IDL_Type

string

Units

unitless

Description: An string providing detailed information about the error

traceback

IDL_Type

string

Units

unitless

Description: An optional stack trace of the error condition

heartbeat

EFDB_Topic

SALGeneric_logevent_heartbeat

Category

mandatory

heartbeat

IDL_Type

boolean

Units

unitless

Description: Beats the drum.

logLevel

Description: Current logging level.

EFDB_Topic

SALGeneric_logevent_logLevel

Category

mandatory

level

IDL_Type

int

Units

unitless

Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.

subsystem

IDL_Type

string

Units

unitless

Description: Subsystem this applies to. The empty string if all subsystems. Beyond that, the meaning depends on the CSC.

logMessage

Description: A log message.

EFDB_Topic

SALGeneric_logevent_logMessage

Category

mandatory

name

IDL_Type

string

Units

unitless

Description: Log name.

level

IDL_Type

int

Units

unitless

Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.

message

IDL_Type

string

Units

unitless

Description: Log message.

traceback

IDL_Type

string

Units

unitless

Description: Exception traceback; “” if not an exception.

filePath

IDL_Type

string

Units

unitless

Description: Path to source file.

functionName

IDL_Type

string

Units

unitless

Description: Function or method name.

lineNumber

IDL_Type

long

Units

unitless

Description: Line number in the file specified by filePath.

process

IDL_Type

long

Units

unitless

Description: Process ID.

timestamp

IDL_Type

double

Units

second

Description: The time at which the condition being reported was observed (TAI unix seconds). 0 if unspecified.

settingVersions

Description: Information about settings which can be specified in the start command.

EFDB_Topic

SALGeneric_logevent_settingVersions

Category

configurable

recommendedSettingsVersion

IDL_Type

string

Units

unitless

Description: List of comma seperated recomended versions of settings sets

recommendedSettingsLabels

IDL_Type

string

Units

unitless

Description: List of comma seperated names of settings sets

settingsUrl

IDL_Type

string

Units

unitless

Description: The URL where the settings sets definitions can be found

settingsApplied

Description: Base settings applied.

EFDB_Topic

SALGeneric_logevent_settingsApplied

Category

configurable

settingsVersion

IDL_Type

string

IDL_Size

256

Units

unitless

Description: The SHA or name corresponding to the published configuration

otherSettingsEvents

IDL_Type

string

Units

unitless

Description: A comma delimited list of other specific CSC configuration events. This may be blank if no other CSC specific events are necessary

simulationMode

Description: Current simulation mode.

EFDB_Topic

SALGeneric_logevent_simulationMode

Category

csc

mode

IDL_Type

int

Units

unitless

Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.

softwareVersions

Description: Current versions of software in use by CSC.

EFDB_Topic

SALGeneric_logevent_softwareVersions

Category

mandatory

salVersion

IDL_Type

string

IDL_Size

256

Units

unitless

Description: This is the current version of SAL generation

xmlVersion

IDL_Type

string

IDL_Size

256

Units

unitless

Description: This is the current version of CSC XML

openSpliceVersion

IDL_Type

string

IDL_Size

256

Units

unitless

Description: This is the current version of OpenSplice

cscVersion

IDL_Type

string

IDL_Size

256

Units

unitless

Description: This is the top-level version of the CSC

subsystemVersions

IDL_Type

string

Units

unitless

Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within a CSC

summaryState

Description: Current summary state of the CSC

EFDB_Topic

SALGeneric_logevent_summaryState

Category

csc

summaryState

IDL_Type

long

Units

unitless

Description: High level state machine state identifier

Telemetry

position

Description: Current position of azimuth and both shutter doors.

EFDB_Topic

ATDome_position

dropoutDoorOpeningPercentage

IDL_Type

float

Units

unitless

Description: Current dropout shutter door opening percentage.

mainDoorOpeningPercentage

IDL_Type

float

Units

unitless

Description: Current main shutter door opening percentage.

azimuthPosition

IDL_Type

double

Units

deg

Description: Current azimuth position.

azimuthEncoderPosition

IDL_Type

long long

Units

unitless

Description: Current azimuth encoder reading.