CCCamera¶
Note
This page is generated by python script generate_cet.py.
Commands¶
clear¶
- EFDB_Topic
CCCamera_command_clear
nClears¶
- IDL_Type
long
- Units
unitless
Description: Number of consecutive clear operations to perform
disableCalibration¶
- EFDB_Topic
CCCamera_command_disableCalibration
discardRows¶
- EFDB_Topic
CCCamera_command_discardRows
nRows¶
- IDL_Type
long
- Units
unitless
Description: Number of rows to discard
enableCalibration¶
- EFDB_Topic
CCCamera_command_enableCalibration
endImage¶
- EFDB_Topic
CCCamera_command_endImage
initGuiders¶
- EFDB_Topic
CCCamera_command_initGuiders
roiSpec¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: TBD specification for region of interest
initImage¶
- EFDB_Topic
CCCamera_command_initImage
deltaT¶
- IDL_Type
double
- Units
second
Description: Estimate of time period before takeImages will be issued
play¶
- EFDB_Topic
CCCamera_command_play
playlist¶
- IDL_Type
string
- Units
unitless
Description: Name of an existing DAQ playlist to play
repeat¶
- IDL_Type
boolean
- Units
unitless
Description: True if the playlist should run in repeat mode
playlist¶
- EFDB_Topic
CCCamera_command_playlist
playlist¶
- IDL_Type
string
- Units
unitless
Description: Name of a DAQ playlist to be defined (replaced if exists)
folder¶
- IDL_Type
string
- Units
unitless
Description: Folder where images exist in DAQ 2-day store (typically emu)
images¶
- IDL_Type
string
- Units
unitless
Description: Colon (:) delimited list of images to add to the playlist
setFilter¶
- EFDB_Topic
CCCamera_command_setFilter
name¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: The filter name to install
startImage¶
- EFDB_Topic
CCCamera_command_startImage
shutter¶
- IDL_Type
boolean
- Units
unitless
Description: True if the shutter should be opened/closed
sensors¶
- IDL_Type
string
- Units
unitless
Description: Sensors to be read out, if blank all configured sensors will be read out
keyValueMap¶
- IDL_Type
string
- Units
unitless
Description: Map of additional key value pairs, e.g. imageType: XYZ, groupId: ABC
obsNote¶
- IDL_Type
string
- Units
unitless
Description: An arbitrary operator provided string, useful for informally flagging images
timeout¶
- IDL_Type
double
- Units
second
Description: Timeout after which imaging will be abandoned if no endImage command received
stop¶
- EFDB_Topic
CCCamera_command_stop
takeImages¶
- EFDB_Topic
CCCamera_command_takeImages
numImages¶
- IDL_Type
long
- Units
unitless
Description: Number of consecutive images to take
expTime¶
- IDL_Type
double
- Units
second
Description: Exposure time
shutter¶
- IDL_Type
boolean
- Units
unitless
Description: True if the shutter should be opened/closed
sensors¶
- IDL_Type
string
- Units
unitless
Description: Sensors to be read out, if blank all configured sensors will be read out
keyValueMap¶
- IDL_Type
string
- Units
unitless
Description: Map of additional key value pairs to associate extra data with the image(s), e.g. imageType: XYZ, groupId: ABC
obsNote¶
- IDL_Type
string
- Units
unitless
Description: An arbitrary operator provided string, useful for informally flagging images
disable¶
Description: Transition from state Enabled to Disabled.
- EFDB_Topic
SALGeneric_command_disable
- Category
csc
enable¶
Description: Transition from state Disabled to Enabled.
- EFDB_Topic
SALGeneric_command_enable
- Category
csc
enterControl¶
Description: Transition from state Offline to Standby. Only that start in Offline state CSCs support this command; other CSCs start in Standby state and quit when they go to Offline.
- EFDB_Topic
SALGeneric_command_enterControl
exitControl¶
Description: Transition from state Standby to Offline. For CSCs that start in Standby state this makes the CSC quit. CSCs that start in Offline state, they remain active.
- EFDB_Topic
SALGeneric_command_exitControl
- Category
csc
setAuthList¶
- EFDB_Topic
SALGeneric_command_setAuthList
- Category
csc
setLogLevel¶
Description: Set the logging level.
- EFDB_Topic
SALGeneric_command_setLogLevel
- Category
csc
level¶
- IDL_Type
int
- Units
unitless
Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type
string
- Units
unitless
Description: Subsystem this applies to. If empty, the change applies to all subsystems. Beyond that, the meaning depends on the CSC.
standby¶
Description: Transition from state Offline, Disabled or Fault to Standby.
- EFDB_Topic
SALGeneric_command_standby
- Category
csc
start¶
Description: Transition from state Standby to Disable, in a specified configuration.
- EFDB_Topic
SALGeneric_command_start
- Category
csc
settingsToApply¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: Name of the selected settings set
Events¶
daq_monitor_StatsSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_daq_monitor_StatsSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
enablePeriodicPublication¶
- IDL_Type
boolean
- Units
unitless
Description: enable periodic publication
minDiffAlertWarning¶
- IDL_Type
int
- Units
unitless
Description: minimum difference between successive reads to raise Alert at warning level
minDiffLogWarning¶
- IDL_Type
int
- Units
unitless
Description: minimum difference between successive reads to put warning in log
sumDriverChecks¶
- IDL_Type
string
- Units
unitless
Description: Driver Stats for warnings on sums
sumDriverStats¶
- IDL_Type
string
- Units
unitless
Description: Driver Stats for sums over location
sumFirmwareChecks¶
- IDL_Type
string
- Units
unitless
Description: Firmware Stats for warnings on sums
sumFirmwareStats¶
- IDL_Type
string
- Units
unitless
Description: Firmware Stats for sums over location
sumRdsChecks¶
- IDL_Type
string
- Units
unitless
Description: Rds Stats for warnings on sums
sumRdsStats¶
- IDL_Type
string
- Units
unitless
Description: Rds Stats for sums over location
sumRmsChecks¶
- IDL_Type
string
- Units
unitless
Description: Rms Stats for warnings on sums
sumRmsStats¶
- IDL_Type
string
- Units
unitless
Description: Rms Stats for sums over location
daq_monitor_StoreSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_daq_monitor_StoreSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
daqFolder¶
- IDL_Type
string
- Units
unitless
Description: top-level folder for DAQ store
enableAutoPurge¶
- IDL_Type
boolean
- Units
unitless
Description: enable automatic purge of DAQ store
purgeTarget¶
- IDL_Type
double
- Units
unitless
Description: goal of purge for minimum fraction of free disk space
purgeThreshold¶
- IDL_Type
double
- Units
unitless
Description: fraction of free disk space to trigger a store purge
availableFilters¶
- EFDB_Topic
CCCamera_logevent_availableFilters
filterNames¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: A list of installed filter names (comma delimimted, U-001,G-004,R-010,Z-012,Y-014), in the same order as the list of filter types.
calibrationDetailedState¶
- EFDB_Topic
CCCamera_logevent_calibrationDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
DISABLED,ENABLED,INTEGRATING
Description: Enumeration of valid substates
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
ccsCommandState¶
- EFDB_Topic
CCCamera_logevent_ccsCommandState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
IDLE,BUSY
Description: Substate of the CCS command.
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
ccsConfigured¶
- EFDB_Topic
CCCamera_logevent_ccsConfigured
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endInitializeGuider¶
- EFDB_Topic
CCCamera_logevent_endInitializeGuider
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endInitializeImage¶
- EFDB_Topic
CCCamera_logevent_endInitializeImage
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endLoadFilter¶
- EFDB_Topic
CCCamera_logevent_endLoadFilter
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endOfImageTelemetry¶
- Description: Event sent once all telemetry correesponding to the image has been sent. (Typically ~300mS after the end of readout).
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_endOfImageTelemetry
additionalKeys¶
- IDL_Type
string
- Units
unitless
Description: Additional keys passed to the takeImages command (: delimited)
additionalValues¶
- IDL_Type
string
- Units
unitless
Description: Additional values passed to the takeImages command (: delimited, in same order as additionalKeys)
imagesInSequence¶
- IDL_Type
long
- Units
unitless
Description: The total number of requested images in sequence
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
imageIndex¶
- IDL_Type
long
- Units
unitless
Description: The zero based index number for this specific exposure within the sequence
imageSource¶
- IDL_Type
string
- IDL_Size
2
- Units
unitless
Description: The source component of the image name (AT/CC/MC)
imageController¶
- IDL_Type
string
- Units
unitless
Description: The controller for the image (O=OCS/C=CCS/…)
imageDate¶
- IDL_Type
string
- IDL_Size
8
- Units
unitless
Description: The date component of the image name (YYYYMMDD)
imageNumber¶
- IDL_Type
long
- Units
unitless
Description: The image number (SEQNO) component of the image name
timestampAcquisitionStart¶
- IDL_Type
double
- Units
second
Description: The effective time at which the image acquisition started (i.e. the end of the previous clear or readout)
exposureTime¶
- IDL_Type
double
- Units
second
Description: The requested exposure time
imageTag¶
- IDL_Type
string
- IDL_Size
64
- Units
unitless
Description: The DAQ assigned image tag (hex string)
timestampDateObs¶
- IDL_Type
double
- Units
second
Description: The observation date, as computed by CCS (as TAI)
timestampDateEnd¶
- IDL_Type
double
- Units
second
Description: The end observation date, as computed by CCS (as TAI)
measuredShutterOpenTime¶
- IDL_Type
double
- Units
second
- Description: The measured shutter open time, as computed by CCS. This is a best estimate based on a summary of the full information provided
in the shutterBladeMotionProfile events.
darkTime¶
- IDL_Type
double
- Units
second
Description: The dark time, as computed by CCS
emulatedImage¶
- IDL_Type
string
- Units
unitless
Description: When using emulated DAQ, this is the name of the image read from the 2-day store (otherwise an empty string)
endReadout¶
- Description: Event sent at end of readout. When this event is received the corresponding image should be complete
in the DAQ 2-day store. Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_endReadout
additionalKeys¶
- IDL_Type
string
- Units
unitless
Description: Additional keys passed to the takeImages command (: delimited)
additionalValues¶
- IDL_Type
string
- Units
unitless
Description: Additional values passed to the takeImages command (: delimited, in same order as additionalKeys)
imagesInSequence¶
- IDL_Type
long
- Units
unitless
Description: The total number of requested images in sequence
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
imageIndex¶
- IDL_Type
long
- Units
unitless
Description: The zero based index number for this specific exposure within the sequence
imageSource¶
- IDL_Type
string
- IDL_Size
2
- Units
unitless
Description: The source component of the image name (AT/CC/MC)
imageController¶
- IDL_Type
string
- Units
unitless
Description: The controller for the image (O=OCS/C=CCS/…)
imageDate¶
- IDL_Type
string
- IDL_Size
8
- Units
unitless
Description: The date component of the image name (YYYYMMDD)
imageNumber¶
- IDL_Type
long
- Units
unitless
Description: The image number (SEQNO) component of the image name
timestampAcquisitionStart¶
- IDL_Type
double
- Units
second
Description: The effective time at which the image acquisition started (i.e. the end of the previous clear or readout)
requestedExposureTime¶
- IDL_Type
double
- Units
second
Description: The requested exposure time (as specified in the takeImages command)
timestampEndOfReadout¶
- IDL_Type
double
- Units
second
Description: The time at which the readout was completed
endRotateCarousel¶
- EFDB_Topic
CCCamera_logevent_endRotateCarousel
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endSetFilter¶
Description: Event issued once the new filter is in its final position
- EFDB_Topic
CCCamera_logevent_endSetFilter
filterName¶
- IDL_Type
string
- Units
unitless
Description: The name of the filter being installed (e.g. U-001)
filterType¶
- IDL_Type
string
- Units
unitless
- Description: The type of the filter being installed (e.g. g,r,i,z,y,u,none,other). If other it can optionally be
followed by a : delimited qualifier, e.g. other:pinhole
filterSlot¶
- IDL_Type
int
- Units
unitless
Description: The slot which the filter is in (ComCam) or came from (Main Camera)
filterPosition¶
- IDL_Type
double
- Units
mm
Description: For ComCam this is the measured linear encoder position once the filter in in place. For Main Camera it may be unused.
endShutterClose¶
- EFDB_Topic
CCCamera_logevent_endShutterClose
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endShutterOpen¶
- EFDB_Topic
CCCamera_logevent_endShutterOpen
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
endTakeImage¶
- EFDB_Topic
CCCamera_logevent_endTakeImage
endUnloadFilter¶
- EFDB_Topic
CCCamera_logevent_endUnloadFilter
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
fileCommandExecution¶
Description: Each time a command is executed on a single FITS file this event is generated
- EFDB_Topic
CCCamera_logevent_fileCommandExecution
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
timestampCommandComplete¶
- IDL_Type
double
- Units
second
Description: The time when the command completed.
command¶
- IDL_Type
string
- Units
unitless
Description: The comamnd executed included arguments.
rc¶
- IDL_Type
int
- Units
unitless
Description: The return code from the command execution.
filterChangerDetailedState¶
- EFDB_Topic
CCCamera_logevent_filterChangerDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
UNLOADING,LOADING,LOADED,UNLOADED,ROTATING
Description: The filter changer state
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
fitsFilesWritten¶
- Description: When this event is received, all of the CCS files on the diagnostic cluster have been written
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_fitsFilesWritten
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
timestampFilesWritten¶
- IDL_Type
double
- Units
second
Description: The time when the (last) CCS FITS file was written.
rootFileName¶
- IDL_Type
string
- Units
unitless
Description: The common filesystem location of all files below.
relativeFileNames¶
- IDL_Type
string
- Units
unitless
Description: The file system location of each file, relative to rootFileName (: delimited).
fileNode¶
- IDL_Type
string
- Units
unitless
Description: The node on which each file is written (: delimited, in same order as above).
focalPlaneDAQSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_focalPlaneDAQSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
daqFolder¶
- IDL_Type
string
- Units
unitless
Description: Folder in 2-day store where images will be created
daqPartition¶
- IDL_Type
string
- Units
unitless
Description: DAQ partition
emulatedDAQ¶
- IDL_Type
boolean
- Units
unitless
Description: True when using an emulated DAQ
focalPlaneHardwareIdSettingsApplied¶
- Description:
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_focalPlaneHardwareIdSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings.
rebLocation¶
- IDL_Type
string
- Units
unitless
Description: REB location in focal-plane (e.g. R22RebX) (: delimited)
rebLSSTName¶
- IDL_Type
string
- Units
unitless
Description: REB LSST identifier (: delimited)
ccdLocation¶
- IDL_Type
string
- Units
unitless
Description: CCD location in focal-plane (e.g. R22Snn) (: delimited)
ccdLSSTName¶
- IDL_Type
string
- Units
unitless
Description: CCD LSST identifier (: delimited)
ccdManSerNum¶
- IDL_Type
string
- Units
unitless
Description: Sensor manufacturer’s serial number (: delimited)
raftLocation¶
- IDL_Type
string
- Units
unitless
Description: Raft location in focal-plane (e.g. R22) (: delimited)
raftLSSTName¶
- IDL_Type
string
- Units
unitless
Description: Raft identifier (: delimited)
focalPlaneRaftTempControlSettingsApplied¶
- Description:
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_focalPlaneRaftTempControlSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
raftLocation¶
- IDL_Type
string
- Units
unitless
Description: Raft location in focal-plane (e.g. R22) (: delimited)
raft_TempControl_awGain¶
- IDL_Type
double
- Units
unitless
Description: anti-windup gain
raft_TempControl_basePower¶
- IDL_Type
double
- Units
Watt
Description: base power input
raft_TempControl_gain¶
- IDL_Type
double
- Units
unitless
Description: loop gain
raft_TempControl_maxInput¶
- IDL_Type
double
- Units
unitless
Description: maximum input
raft_TempControl_maxOutput¶
- IDL_Type
double
- Units
Watt
Description: maximum PID output
raft_TempControl_minInput¶
- IDL_Type
double
- Units
unitless
Description: minimum input
raft_TempControl_minOutput¶
- IDL_Type
double
- Units
Watt
Description: minimum PID output
raft_TempControl_rebs¶
- IDL_Type
string
- Units
unitless
Description: The REBs with heaters to use
raft_TempControl_setTemp¶
- IDL_Type
double
- Units
C
Description: Temperature set point
raft_TempControl_smoothTime¶
- IDL_Type
double
- Units
second
Description: input smoothing time
raft_TempControl_tempChans¶
- IDL_Type
string
- Units
unitless
Description: Temperature channels to use
raft_TempControl_timeConst¶
- IDL_Type
double
- Units
second
Description: integration time constant
raft_TempControl_tolerance¶
- IDL_Type
double
- Units
unitless
Description: maximum on-target error (%)
focalPlaneRaftTempControlStatusSettingsApplied¶
- Description:
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_focalPlaneRaftTempControlStatusSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
raftLocation¶
- IDL_Type
string
- Units
unitless
Description: Raft location in focal-plane (e.g. R22) (: delimited)
raft_TempControl_active¶
- IDL_Type
boolean
- Units
unitless
Description: True if loop is active
focalPlaneRebRaftsPowerSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_focalPlaneRebRaftsPowerSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
bias0_gdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: GD convert factor
bias0_gdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for GD
bias0_gdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode tolerance
bias0_gdValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for GD at TestVolts
bias0_gdZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for GD at 0V
bias0_odCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OD convert factor
bias0_odIMax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max ODI value
bias0_odTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain tolerance
bias0_odZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for OD at 0V
bias0_ogCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OG convert factor
bias0_ogTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for OG
bias0_ogTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate tolerance
bias0_ogValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for OG at TestVolts
bias0_ogZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for OG at 0V
bias0_rdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: RD convert factor
bias0_rdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for RD
bias0_rdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain tolerance
bias0_rdValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for RD at TestVolts
bias0_rdZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for RD at 0V
bias1_gdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: GD convert factor
bias1_gdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for GD
bias1_gdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode tolerance
bias1_gdValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for GD at TestVolts
bias1_gdZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for GD at 0V
bias1_odCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OD convert factor
bias1_odIMax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max ODI value
bias1_odTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain tolerance
bias1_odZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for OD at 0V
bias1_ogCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OG convert factor
bias1_ogTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for OG
bias1_ogTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate tolerance
bias1_ogValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for OG at TestVolts
bias1_ogZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for OG at 0V
bias1_rdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: RD convert factor
bias1_rdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for RD
bias1_rdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain tolerance
bias1_rdValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for RD at TestVolts
bias1_rdZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for RD at 0V
bias2_gdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: GD convert factor
bias2_gdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for GD
bias2_gdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode tolerance
bias2_gdValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for GD at TestVolts
bias2_gdZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for GD at 0V
bias2_odCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OD convert factor
bias2_odIMax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max ODI value
bias2_odTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain tolerance
bias2_odZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for OD at 0V
bias2_ogCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: OG convert factor
bias2_ogTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for OG
bias2_ogTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate tolerance
bias2_ogValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for OG at TestVolts
bias2_ogZeroErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for OG at 0V
bias2_rdCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: RD convert factor
bias2_rdTestVolts¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Shorts Test Voltage for RD
bias2_rdTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain tolerance
bias2_rdValueErr¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Tolerance for RD at TestVolts
bias2_rdZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for RD at 0V
clkhiAmin¶
- IDL_Type
double
- Units
A
- Count
9
Description: Minimum ON_State CLKHI (A) per REB
clkhiQmax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max OFF_State CLKHI (A) per REB
clkliAmin¶
- IDL_Type
double
- Units
A
- Count
9
Description: Minimum ON_State CLKLI (A) per REB
clkliQmax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max OFF_State CLKLI (A) per REB
dac_clkhIMax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max ClkHI value
dac_clklIMax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max ClkLI value
dac_pclkHighCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Parallel high calib
dac_pclkHighTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for PClkU
dac_pclkHighTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Parallel high tolerance
dac_pclkHighValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for PClkU TestV
dac_pclkHighZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/PClkU test
dac_pclkLowCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Parallel low calib
dac_pclkLowTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for PClkL
dac_pclkLowTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Parallel low tolerance
dac_pclkLowValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for PClkL TestV
dac_pclkLowZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/PClkL test
dac_rgHighCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Reset high calib
dac_rgHighTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for RGU
dac_rgHighTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset high tolerance
dac_rgHighValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for RGU TestV
dac_rgHighZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/RGU test
dac_rgLowCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Reset low calib
dac_rgLowTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for RGL
dac_rgLowTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset low tolerance
dac_rgLowValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for RGL TestV
dac_rgLowZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/RGL test
dac_sclkHighCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Serial high calib
dac_sclkHighTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for SClkU
dac_sclkHighTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Serial high tolerance
dac_sclkHighValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for SClkU TestV
dac_sclkHighZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/SClkU test
dac_sclkLowCal¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Serial low calib
dac_sclkLowTestV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Shorts Test Voltage for SClkL
dac_sclkLowTol¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Serial low tolerance
dac_sclkLowValueErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for SClkL TestV
dac_sclkLowZeroErr¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Tolerance for 0V w/SClkL test
location¶
- IDL_Type
string
- Units
unitless
Description: Reb Location
maxDelta¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Max allowed SlowAdcs delta
maxStep¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Max allowed SlowAdcs step
minTol¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: Min allowed SlowAdcs tolerance
nPowerOnPub¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: Number of consequtive monitor-update pubs after trigger
odiAmin¶
- IDL_Type
double
- Units
A
- Count
9
Description: Minimum ON_State ODI (A) per CCD
odiQmax¶
- IDL_Type
double
- Units
A
- Count
9
Description: Max OFF_State ODI (A) per CCD
focalPlaneRebRaftsSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_focalPlaneRebRaftsSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
bias0_csGateP¶
- IDL_Type
double
- Units
mA
- Count
9
Description: Current source
bias0_gdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode
bias0_odP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain
bias0_ogP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate
bias0_rdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain
bias1_csGateP¶
- IDL_Type
double
- Units
mA
- Count
9
Description: Current source
bias1_gdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode
bias1_odP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain
bias1_ogP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate
bias1_rdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain
bias2_csGateP¶
- IDL_Type
double
- Units
mA
- Count
9
Description: Current source
bias2_gdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Guard diode
bias2_odP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output drain
bias2_ogP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Output gate
bias2_rdP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset drain
dac_pclkHighP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Parallel clock high
dac_pclkLowP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Parallel clock low
dac_rgHighP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset gate high
dac_rgLowP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Reset gate low
dac_sclkHighP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Serial clock high
dac_sclkLowP¶
- IDL_Type
double
- Units
volt
- Count
9
Description: Serial clock low
disableRTDHardwareCheck¶
- IDL_Type
boolean
- Units
unitless
- Count
9
Description: Disables the RTD derived CCD type check.
location¶
- IDL_Type
string
- Units
unitless
Description: Reb Location
serialNum¶
- IDL_Type
long
- Units
unitless
- Count
9
Description: Serial number
focalPlaneSequencerConfigSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_focalPlaneSequencerConfigSettingsApplied
clearCountParameter¶
- IDL_Type
string
- Units
unitless
Description: Name of the clear count parameter
clearMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the clear main
idleFlushMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the idle flush main
integrateMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the integrate main
metaDataRegisters¶
- IDL_Type
string
- Units
unitless
Description: Names of meta-data related registers which must be in the sequencer
overCols¶
- IDL_Type
int
- Units
unitless
Description: overCols
overRows¶
- IDL_Type
int
- Units
unitless
Description: overRows
postCols¶
- IDL_Type
int
- Units
unitless
Description: postCols
postRows¶
- IDL_Type
int
- Units
unitless
Description: postRows
preCols¶
- IDL_Type
int
- Units
unitless
Description: preCols
preRows¶
- IDL_Type
int
- Units
unitless
Description: preRows
pseudoReadMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the pseudo read main
readCols¶
- IDL_Type
int
- Units
unitless
Description: readCols
readCols2¶
- IDL_Type
int
- Units
unitless
Description: readCol2
readMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the read main
readRows¶
- IDL_Type
int
- Units
unitless
Description: readRows
rowShiftForwardMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the row shift forward main
rowShiftReverseMain¶
- IDL_Type
string
- Units
unitless
Description: Name of the row shift reverse main
scanMode¶
- IDL_Type
boolean
- Units
unitless
Description: True if the sequencer is in scan mode
sequencer¶
- IDL_Type
string
- Units
unitless
Description: sequencer
sequencerChecksums¶
- IDL_Type
string
- Units
unitless
Description: sequencerChecksums
shiftCountParameter¶
- IDL_Type
string
- Units
unitless
Description: Name of the shift count parameter
transparentMode¶
- IDL_Type
int
- Units
unitless
Description: True if the ASPIC is in transparent mode
underCols¶
- IDL_Type
int
- Units
unitless
Description: underCols
focalPlaneSummaryInfo¶
- Description: Special event for use by header service. All of the information in this event is redundant (i,e. also supplied in
other settingsApplied events), but the information in this event is formatted for ease-of-use of the header service, specifically information which is REB or Raft specific is repeated for each CCD. This event will be sent at the same time as other settingsApplied events Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_focalPlaneSummaryInfo
ccdLocation¶
- IDL_Type
string
- Units
unitless
- Description: CCD location in focal-plane (e.g. R22S01) (: delimited).
This should be considered the key for all the remaining items, which will be in the same order as the locations, whether they are arrays or : delimited strings.
raftBay¶
- IDL_Type
string
- Units
unitless
Description: The raft bay for each CCD listed above, of the form Rnn : delimited
ccdSlot¶
- IDL_Type
string
- Units
unitless
Description: The CCD slot for each CCD listed above, of the form SXn : delimited
rebSerialNumber¶
- IDL_Type
string
- Units
unitless
Description: REB hardware serial number (: delimited)
rebLSSTName¶
- IDL_Type
string
- Units
unitless
Description: REB LSST identifier (: delimited)
ccdLSSTName¶
- IDL_Type
string
- Units
unitless
Description: CCD LSST identifier (: delimited)
raftLSSTName¶
- IDL_Type
string
- Units
unitless
Description: Raft LSST identifier (: delimited)
ccdManSerNum¶
- IDL_Type
string
- Units
unitless
Description: Sensor manufacturer’s serial number (: delimited)
ccdManufacturer¶
- IDL_Type
string
- Units
unitless
Description: Sensor manufacturer E2V or ITL (: delimited)
ccdType¶
- IDL_Type
int
- Units
unitless
- Count
9
- Enumeration
E2V,ITL
Description: The type of each CCD
ccdTempSetPoint¶
- IDL_Type
double
- Units
unitless
- Count
9
Description: Sensor temperature set point
sequencerKey¶
- IDL_Type
string
- Units
unitless
Description: The name of the CCD sequencer loaded (: delimited)
sequencerChecksum¶
- IDL_Type
string
- Units
unitless
Description: The checksum of the CCD sequencer loaded (: delimited)
imageReadinessDetailedState¶
- EFDB_Topic
CCCamera_logevent_imageReadinessDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
READY,NOT_READY,GETTING_READY
Description: Enumeration of valid substates
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
imageReadoutParameters¶
- Description: Event sent describing image readout parameters.
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_imageReadoutParameters
imageName¶
- IDL_Type
string
- Units
unitless
Description: The imageName for this specific exposure
ccdLocation¶
- IDL_Type
string
- Units
unitless
Description: A list of all ccds currently configured, of the form RnnSnn, : delimited (empty if entry not used)
raftBay¶
- IDL_Type
string
- Units
unitless
Description: The raft bay for each CCD listed above, of the form Rnn : delimited
ccdSlot¶
- IDL_Type
string
- Units
unitless
Description: The CCD slot for each CCD listed above, of the form SXn : delimited
ccdType¶
- IDL_Type
int
- Units
unitless
- Count
9
- Enumeration
E2V,ITL
Description: The type of each CCD, this determines segRows, segCols and serCols
overRows¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
overCols¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
readRows¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
readCols¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
readCols2¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
preCols¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
preRows¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
postCols¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
underCols¶
- IDL_Type
int
- Units
unitless
- Count
9
Description: See CCD Readout Parameters Diagram
daqFolder¶
- IDL_Type
string
- Units
unitless
Description: DAQ folder where image will be created
daqAnnotation¶
- IDL_Type
string
- Units
unitless
Description: Annotation sent to DAQ
imageStored¶
- Description: When this event is received the corresponding image should be complete in the DAQ 2-day store.
Once in use this will allow endReadout event to go back to indicating that the readout is complete (sequencers finished). Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_imageStored
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
timestampImageStored¶
- IDL_Type
double
- Units
second
Description: The time when the DAQ image was store was complete.
imageVisualization¶
Description: Event sent when image visualization is ready
- EFDB_Topic
CCCamera_logevent_imageVisualization
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
url¶
- IDL_Type
string
- Units
unitless
Description: The URL at which the full image visualization is available.
thumbnail¶
- IDL_Type
string
- Units
unitless
Description: The URL at which the image thumbnail is available.
daq_monitorSettingsApplied¶
- EFDB_Topic
CCCamera_logevent_daq_monitorSettingsApplied
version¶
- IDL_Type
long
- Units
unitless
Description: Version number of these settings
daqPartition¶
- IDL_Type
string
- Units
unitless
Description: partition containing DAQ store
notReadyToTakeImage¶
- EFDB_Topic
CCCamera_logevent_notReadyToTakeImage
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
offlineDetailedState¶
- EFDB_Topic
CCCamera_logevent_offlineDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
OFFLINE_AVAILABLE,OFFLINE_PUBLISH_ONLY
Description: Enumeration of valid substates
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
prepareToTakeImage¶
- EFDB_Topic
CCCamera_logevent_prepareToTakeImage
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
raftsDetailedState¶
- EFDB_Topic
CCCamera_logevent_raftsDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
NEEDS_CLEAR,CLEARING,INTEGRATING,READING_OUT,QUIESCENT
Description: Enumeration of valid substates
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
readyToTakeImage¶
- EFDB_Topic
CCCamera_logevent_readyToTakeImage
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
shutterBladeMotionProfile¶
- Description: The motion profile for each shutter blade (so normally 2 per image).
Note: Note this is overkill for ComCam, but aims to be the same as for the main camera. For ComCam the encoder and hall effect measurements will be simulated, or empty (and probably initially empty). Note 2: The coordinate system in which positions are reported is as yet ill-defined, and the origin (but not direction) may vary between the 2 blades. The data to convert reported position to something more useful will be in the corresponding blade configuration (aka settingsApplied). It is TBD whether we will try to take this out in the positions reported to SAL. Note 3: The maximum number of positions reported by the firmware for both encoder position and hall effect hall sensors is hard-wired to 240. This is used as the array dimension here. The actual number of points reported will be in encoderCount and hallSensorCount. The array element values beyond the count are undefined (but probably 0)
- EFDB_Topic
CCCamera_logevent_shutterBladeMotionProfile
blade¶
- IDL_Type
long
- Units
unitless
- Enumeration
PLUS_X,MINUS_X
Description: The blade that is moving
direction¶
- IDL_Type
long
- Units
unitless
- Enumeration
OPEN,CLOSE
Description: Is the blade opening or closing
timestampStart¶
- IDL_Type
double
- Units
second
Description: The time at which the motion started (TAI)
startPosition¶
- IDL_Type
double
- Units
mm
Description: The start position of the blade
targetDuration¶
- IDL_Type
double
- Units
second
Description: Requested blade motion time
targetPosition¶
- IDL_Type
double
- Units
mm
Description: Requested position at end of motion
endPosition¶
- IDL_Type
double
- Units
mm
Description: Actual position and end of motion
actualDuration¶
- IDL_Type
double
- Units
second
Description: Actual blade motion time
hallSensorCount¶
- IDL_Type
int
- Units
unitless
Description: Actual number of hall sensor transitions
timestampHallSensor¶
- IDL_Type
double
- Units
second
- Count
240
Description: Hall effect switch trasition times
hallSensorID¶
- IDL_Type
int
- Units
unitless
- Count
240
Description: Which Hall effect switch trasitioned
hallSensorPosition¶
- IDL_Type
double
- Units
mm
- Count
240
Description: Estimated position of the leading edge of the blade at transition time
hallSensorTransition¶
- IDL_Type
boolean
- Units
unitless
- Count
240
Description: true if switch turned on, false if switch turned off
encoderCount¶
- IDL_Type
int
- Units
unitless
Description: Actual number of encoder measurements
timestampEncoder¶
- IDL_Type
double
- Units
second
- Count
240
Description: timestamps for motor encoder position measurements (TAI)
encoderPosition¶
- IDL_Type
double
- Units
mm
- Count
240
Description: Positions for motor encoder position measurements
shutterDetailedState¶
- EFDB_Topic
CCCamera_logevent_shutterDetailedState
substate¶
- IDL_Type
long
- Units
unitless
- Enumeration
CLOSED,OPEN,CLOSING,OPENING
Description: Enumeration of valid substates
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
startIntegration¶
- Description: Event sent at start of image integration.
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_startIntegration
additionalKeys¶
- IDL_Type
string
- Units
unitless
Description: Additional keys passed to the takeImages command (: delimited)
additionalValues¶
- IDL_Type
string
- Units
unitless
Description: Additional values passed to the takeImages command (: delimited, in same order as additionalKeys)
imagesInSequence¶
- IDL_Type
long
- Units
unitless
Description: The total number of requested images in sequence
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
imageIndex¶
- IDL_Type
long
- Units
unitless
Description: The zero based index number for this specific exposure within the sequence
imageSource¶
- IDL_Type
string
- IDL_Size
2
- Units
unitless
Description: The source component of the image name (AT/CC/MC)
imageController¶
- IDL_Type
string
- Units
unitless
Description: The controller for the image (O=OCS/C=CCS/…)
imageDate¶
- IDL_Type
string
- IDL_Size
8
- Units
unitless
Description: The date component of the image name (YYYYMMDD)
imageNumber¶
- IDL_Type
long
- Units
unitless
Description: The image number (SEQNO) component of the image name
timestampAcquisitionStart¶
- IDL_Type
double
- Units
second
Description: The effective time at which the image acquisition started (i.e. the end of the previous clear or readout)
exposureTime¶
- IDL_Type
double
- Units
second
Description: The requested exposure time
startLoadFilter¶
- EFDB_Topic
CCCamera_logevent_startLoadFilter
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
startReadout¶
- Description: Event sent at start of readout.
Note: all : delimited strings (aka string arrays) follow the escaping convention defined in CAP-572
- EFDB_Topic
CCCamera_logevent_startReadout
additionalKeys¶
- IDL_Type
string
- Units
unitless
Description: Additional keys passed to the takeImages command (: delimited)
additionalValues¶
- IDL_Type
string
- Units
unitless
Description: Additional values passed to the takeImages command (: delimited, in same order as additionalKeys)
imagesInSequence¶
- IDL_Type
long
- Units
unitless
Description: The total number of requested images in sequence
imageName¶
- IDL_Type
string
- IDL_Size
32
- Units
unitless
Description: The imageName for this specific exposure, assigned by the camera
imageIndex¶
- IDL_Type
long
- Units
unitless
Description: The zero based index number for this specific exposure within the sequence
imageSource¶
- IDL_Type
string
- IDL_Size
2
- Units
unitless
Description: The source component of the image name (AT/CC/MC)
imageController¶
- IDL_Type
string
- Units
unitless
Description: The controller for the image (O=OCS/C=CCS/…)
imageDate¶
- IDL_Type
string
- IDL_Size
8
- Units
unitless
Description: The date component of the image name (YYYYMMDD)
imageNumber¶
- IDL_Type
long
- Units
unitless
Description: The image number (SEQNO) component of the image name
timestampAcquisitionStart¶
- IDL_Type
double
- Units
second
Description: The effective time at which the image acquisition started (i.e. the end of the previous clear or readout)
exposureTime¶
- IDL_Type
double
- Units
second
Description: The requested exposure time
timestampStartOfReadout¶
- IDL_Type
double
- Units
second
Description: The time at which the readout was triggered
startRotateCarousel¶
- EFDB_Topic
CCCamera_logevent_startRotateCarousel
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
startSetFilter¶
- EFDB_Topic
CCCamera_logevent_startSetFilter
filterName¶
- IDL_Type
string
- Units
unitless
Description: The name of the filter being installed (e.g. U-001)
filterType¶
- IDL_Type
string
- Units
unitless
- Description: The type of the filter being installed (e.g. g,r,i,z,y,u,none,other). If other it can optionally be
followed by a : delimited qualifier, e.g. other:pinhole
startShutterClose¶
- EFDB_Topic
CCCamera_logevent_startShutterClose
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
startShutterOpen¶
- EFDB_Topic
CCCamera_logevent_startShutterOpen
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
startUnloadFilter¶
- EFDB_Topic
CCCamera_logevent_startUnloadFilter
timestampTransition¶
- IDL_Type
double
- Units
second
Description: The time at which the state transition occurred
appliedSettingsMatchStart¶
- EFDB_Topic
SALGeneric_logevent_appliedSettingsMatchStart
- Category
configurable
appliedSettingsMatchStartIsTrue¶
- IDL_Type
boolean
- Units
unitless
Description: True when the configuration matches the start conditions
authList¶
- EFDB_Topic
SALGeneric_logevent_authList
- Category
csc
errorCode¶
Description: Output when a CSC goes into the Fault state as an explanation of the problem.
- EFDB_Topic
SALGeneric_logevent_errorCode
- Category
csc
errorCode¶
- IDL_Type
long
- Units
unitless
Description: A numeric error code
errorReport¶
- IDL_Type
string
- Units
unitless
Description: An string providing detailed information about the error
traceback¶
- IDL_Type
string
- Units
unitless
Description: An optional stack trace of the error condition
heartbeat¶
- EFDB_Topic
SALGeneric_logevent_heartbeat
- Category
mandatory
heartbeat¶
- IDL_Type
boolean
- Units
unitless
Description: Beats the drum.
largeFileObjectAvailable¶
Description: Large file object available event.
- EFDB_Topic
SALGeneric_logevent_largeFileObjectAvailable
url¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: A Uniform Resource Locator which links to a Large File Object either for ingest into the EFD Large File Annex, or to announce the successful copy of same to the EFD Large File Annex.Protocols are those supported by the cURL library.
generator¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: Name of the package which generated the file being announced
version¶
- IDL_Type
float
- Units
unitless
Description: A dotted x.y version number denoting the file format revision
byteSize¶
- IDL_Type
long
- Units
unitless
Description: Size of file in bytes
checkSum¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: Hexadecimal character string holding the checksum of the file
mimeType¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: Mime Type code for the file
id¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: A generic identifier field
logLevel¶
Description: Current logging level.
- EFDB_Topic
SALGeneric_logevent_logLevel
- Category
mandatory
level¶
- IDL_Type
int
- Units
unitless
Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type
string
- Units
unitless
Description: Subsystem this applies to. The empty string if all subsystems. Beyond that, the meaning depends on the CSC.
logMessage¶
Description: A log message.
- EFDB_Topic
SALGeneric_logevent_logMessage
- Category
mandatory
name¶
- IDL_Type
string
- Units
unitless
Description: Log name.
level¶
- IDL_Type
int
- Units
unitless
Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.
message¶
- IDL_Type
string
- Units
unitless
Description: Log message.
traceback¶
- IDL_Type
string
- Units
unitless
Description: Exception traceback; “” if not an exception.
filePath¶
- IDL_Type
string
- Units
unitless
Description: Path to source file.
functionName¶
- IDL_Type
string
- Units
unitless
Description: Function or method name.
lineNumber¶
- IDL_Type
long
- Units
unitless
Description: Line number in the file specified by filePath.
process¶
- IDL_Type
long
- Units
unitless
Description: Process ID.
timestamp¶
- IDL_Type
double
- Units
second
Description: The time at which the condition being reported was observed (TAI unix seconds). 0 if unspecified.
settingVersions¶
Description: Information about settings which can be specified in the start command.
- EFDB_Topic
SALGeneric_logevent_settingVersions
- Category
configurable
recommendedSettingsVersion¶
- IDL_Type
string
- Units
unitless
Description: List of comma seperated recomended versions of settings sets
recommendedSettingsLabels¶
- IDL_Type
string
- Units
unitless
Description: List of comma seperated names of settings sets
settingsUrl¶
- IDL_Type
string
- Units
unitless
Description: The URL where the settings sets definitions can be found
settingsApplied¶
Description: Base settings applied.
- EFDB_Topic
SALGeneric_logevent_settingsApplied
- Category
configurable
settingsVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: The SHA or name corresponding to the published configuration
otherSettingsEvents¶
- IDL_Type
string
- Units
unitless
Description: A comma delimited list of other specific CSC configuration events. This may be blank if no other CSC specific events are necessary
simulationMode¶
Description: Current simulation mode.
- EFDB_Topic
SALGeneric_logevent_simulationMode
- Category
csc
mode¶
- IDL_Type
int
- Units
unitless
Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.
softwareVersions¶
Description: Current versions of software in use by CSC.
- EFDB_Topic
SALGeneric_logevent_softwareVersions
- Category
mandatory
salVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of SAL generation
xmlVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of CSC XML
openSpliceVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the current version of OpenSplice
cscVersion¶
- IDL_Type
string
- IDL_Size
256
- Units
unitless
Description: This is the top-level version of the CSC
subsystemVersions¶
- IDL_Type
string
- Units
unitless
Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within a CSC
summaryState¶
Description: Current summary state of the CSC
- EFDB_Topic
SALGeneric_logevent_summaryState
- Category
csc
summaryState¶
- IDL_Type
long
- Units
unitless
Description: High level state machine state identifier
Telemetry¶
quadbox_PDU_24VC¶
- EFDB_Topic
CCCamera_quadbox_PDU_24VC
bpu_Maq20_I¶
- IDL_Type
double
- Units
mA
Description: Body purge MAQ20 current
ion_Pumps_I¶
- IDL_Type
double
- Units
mA
Description: Ion pumps current
fpga_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Clean PDU FPGA temperature
bpu_Maq20_V¶
- IDL_Type
double
- Units
Volt
Description: Body purge MAQ20 voltage
board_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Clean PDU board temperature
body_Purge_V¶
- IDL_Type
double
- Units
Volt
Description: Body purge voltage
pwr_Cry_HCU_V¶
- IDL_Type
double
- Units
Volt
Description: Power/cryo HCU voltage
pwr_Cry_HCU_I¶
- IDL_Type
double
- Units
mA
Description: Power/cryo HCU current
body_Purge_I¶
- IDL_Type
double
- Units
mA
Description: Body purge current
gauges_V¶
- IDL_Type
double
- Units
Volt
Description: Gauges voltage
main_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Clean PDU main temperature
main_V¶
- IDL_Type
double
- Units
Volt
Description: 24V Clean PDU main voltage
ion_Pumps_V¶
- IDL_Type
double
- Units
Volt
Description: Ion pumps voltage
main_I¶
- IDL_Type
double
- Units
mA
Description: 24V Clean PDU main current
gauges_I¶
- IDL_Type
double
- Units
mA
Description: Gauges current
fes_Shu_HCU_I¶
- IDL_Type
double
- Units
mA
Description: FES/shutter HCU current
fes_Shu_HCU_V¶
- IDL_Type
double
- Units
Volt
Description: FES/shutter HCU voltage
quadbox_PDU_24VD¶
- EFDB_Topic
CCCamera_quadbox_PDU_24VD
board_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Dirty PDU board temperature
fpga_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Dirty PDU FPGA temperature
cryo_Turbo_I¶
- IDL_Type
double
- Units
mA
Description: Cryo turbo pump current
main_V¶
- IDL_Type
double
- Units
Volt
Description: 24V Dirty PDU main voltage
main_T¶
- IDL_Type
double
- Units
Celsius
Description: 24V Dirty PDU main temperature
cryo_Turbo_V¶
- IDL_Type
double
- Units
Volt
Description: Cryo turbo pump voltage
main_I¶
- IDL_Type
double
- Units
mA
Description: 24V Dirty PDU main current
fes_I¶
- IDL_Type
double
- Units
mA
Description: FES current
fes_V¶
- IDL_Type
double
- Units
Volt
Description: FES voltage
quadbox_PDU_48V¶
- EFDB_Topic
CCCamera_quadbox_PDU_48V
board_T¶
- IDL_Type
double
- Units
Celsius
Description: 48V PDU board temperature
main_T¶
- IDL_Type
double
- Units
Celsius
Description: 48V PDU main temperature
main_V¶
- IDL_Type
double
- Units
Volt
Description: 48V PDU main voltage
main_I¶
- IDL_Type
double
- Units
mA
Description: 48V PDU main current
fpga_T¶
- IDL_Type
double
- Units
Celsius
Description: 48V PDU FPGA temperature
cryotel0_I¶
- IDL_Type
double
- Units
mA
Description: Cryotel0 current
cryotel0_V¶
- IDL_Type
double
- Units
Volt
Description: Cryotel0 voltage
cryotel1_I¶
- IDL_Type
double
- Units
mA
Description: Cryotel1 current
cryotel1_V¶
- IDL_Type
double
- Units
Volt
Description: Cryotel1 voltage
cryotel2_I¶
- IDL_Type
double
- Units
mA
Description: Cryotel2 current
cryotel2_V¶
- IDL_Type
double
- Units
Volt
Description: Cryotel2 voltage
reb_bulk_I¶
- IDL_Type
double
- Units
mA
Description: REB Bulk current
reb_bulk_V¶
- IDL_Type
double
- Units
Volt
Description: REB Bulk voltage
quadbox_PDU_5V¶
- EFDB_Topic
CCCamera_quadbox_PDU_5V
otm_0_B_V¶
- IDL_Type
double
- Units
Volt
Description: OTM 0-B voltage
otm_0_A_V¶
- IDL_Type
double
- Units
Volt
Description: OTM 0-A voltage
otm_0_A_I¶
- IDL_Type
double
- Units
mA
Description: OTM 0-A current
otm_0_B_I¶
- IDL_Type
double
- Units
mA
Description: OTM 0-B current
quadbox_BFR¶
- EFDB_Topic
CCCamera_quadbox_BFR
heater_I¶
- IDL_Type
double
- Units
mA
Description: Heater current
protection_I¶
- IDL_Type
double
- Units
mA
Description: Protection system current
dirty_48V_I¶
- IDL_Type
double
- Units
mA
Description: Dirty 48V current
dirty_24V_I¶
- IDL_Type
double
- Units
mA
Description: Dirty 24V current
clean_5_24V_I¶
- IDL_Type
double
- Units
mA
Description: Clean 5 and 24V current
rebps_0¶
- IDL_Type
double
- Units
mA
Description: REB PS 0-2 current
dirty_28V_I¶
- IDL_Type
double
- Units
mA
Description: Dirty 28V current
fp_Ccd¶
- EFDB_Topic
CCCamera_fp_Ccd
gDV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: GD 0 voltage
location¶
- IDL_Type
string
- Units
unitless
Description: Ccd Location
oDV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: OD 0 voltage
oGV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: OG 0 voltage
rDV¶
- IDL_Type
double
- Units
Volt
- Count
9
Description: RD 0 voltage
temp¶
- IDL_Type
double
- Units
Celsius
- Count
9
Description: S00/Temp temperature
vacuum_Cold1¶
- EFDB_Topic
CCCamera_vacuum_Cold1
setPower¶
- IDL_Type
double
- Units
W
Description: Cooler power
power¶
- IDL_Type
double
- Units
W
Description: Cooler power
rejectTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler reject temperature reading
autoOnTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff turn back on temperature setting
autoOffTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff temperature setting
temperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler temperature
autoOffEnabled¶
- IDL_Type
double
- Units
unitless
Description: Cooler auto shutoff state
setpoint¶
- IDL_Type
double
- Units
Celsius
Description: Cooler setpoint temperature
vacuum_Cold2¶
- EFDB_Topic
CCCamera_vacuum_Cold2
temperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler temperature
rejectTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler reject temperature reading
autoOnTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff turn back on temperature setting
setpoint¶
- IDL_Type
double
- Units
Celsius
Description: Cooler setpoint temperature
power¶
- IDL_Type
double
- Units
W
Description: Cooler power
autoOffEnabled¶
- IDL_Type
double
- Units
unitless
Description: Cooler auto shutoff state
autoOffTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff temperature setting
setPower¶
- IDL_Type
double
- Units
W
Description: Cooler power
vacuum_Cryo¶
- EFDB_Topic
CCCamera_vacuum_Cryo
rejectTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler reject temperature reading
autoOffEnabled¶
- IDL_Type
double
- Units
unitless
Description: Cooler auto shutoff state
power¶
- IDL_Type
double
- Units
W
Description: Cooler power
setPower¶
- IDL_Type
double
- Units
W
Description: Cooler power
temperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler temperature
autoOnTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff turn back on temperature setting
setpoint¶
- IDL_Type
double
- Units
Celsius
Description: Cooler setpoint temperature
autoOffTemperature¶
- IDL_Type
double
- Units
Celsius
Description: Cooler auto shutoff temperature setting
vacuum_IonPumps¶
- EFDB_Topic
CCCamera_vacuum_IonPumps
ionpump_voltage¶
- IDL_Type
double
- Units
Volt
Description: Cryo ion pump 1 voltage
ionpump_current¶
- IDL_Type
double
- Units
mA
Description: Cryo ion pump 1 current
rebpower_Reb¶
- EFDB_Topic
CCCamera_rebpower_Reb
digital_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 digital PSVoltage before LDO
location¶
- IDL_Type
string
- Units
unitless
Description: Reb Location
digital_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
digital_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
digital_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
digital_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
analog_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 analog PSVoltage before LDO
analog_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
analog_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
analog_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
analog_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
od_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 OD PSVoltage before LDO
od_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
od_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
od_VaftLDO2¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO2
od_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
od_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
clockhi_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 clockhi PSVoltage before LDO
clockhi_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
clockhi_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
clockhi_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
clockhi_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
clocklo_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 clocklo PSVoltage before LDO
clocklo_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
clocklo_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
clocklo_VaftLDO2¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO2
clocklo_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
clocklo_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
heater_VbefLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 heater PSVoltage before LDO
heater_IbefLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before LDO
heater_VaftLDO¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after LDO
heater_IaftLDO¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current after LDO
heater_VaftSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Voltage after switch
hvbias_VbefSwch¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: R22/Reb0 hvbias PSVoltage before switch
hvbias_IbefSwch¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Current before switch
power¶
- IDL_Type
double
- Units
Watt
- Count
3
Description: R22/Reb0 all PSsTotal power
fp_Reb¶
- EFDB_Topic
CCCamera_fp_Reb
anaI¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Analog PS current
aspicl_Temp0¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 0 lower temp
aspicl_Temp1¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 1 lower temp
aspicl_Temp2¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 2 lower temp
aspicu_Temp0¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 0 upper temp
aspicu_Temp1¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 1 upper temp
aspicu_Temp2¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: ASPIC 2 upper temp
clkHI¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Clock High PS current
clkHV¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Clock High PS voltage
clkLI¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Clock Low PS current
clkLV¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Clock Low PS voltage
digI¶
- IDL_Type
double
- Units
mA
- Count
3
Description: Digital PS current
digV¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Digital PS voltage
htrV¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Heater voltage
htrW¶
- IDL_Type
double
- Units
Watt
- Count
3
Description: Heater power
hVBiasSwitch¶
- IDL_Type
double
- Units
unitless
- Count
3
Description: HV bias switch
location¶
- IDL_Type
string
- Units
unitless
Description: Reb Location
oDI¶
- IDL_Type
double
- Units
mA
- Count
3
Description: OD PS current
oDV¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: OD PS voltage
pClkL¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Parallel lower
pClkU¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Parallel upper
power¶
- IDL_Type
double
- Units
Watt
- Count
3
Description: Total power
ref05V¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: 5V ref 0 voltage
ref125V¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: 2.5V ref 1 voltage
ref15V¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: 5V ref 1 voltage
ref25V¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: 5V ref 2 voltage
refN12¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Negative 12 ref
refP12¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Positive 12 ref
rGL¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Reset gate lower
rGU¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Reset gate upper
rTDTemp¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: RTD temperature
sClkL¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Serial lower
sClkU¶
- IDL_Type
double
- Units
Volt
- Count
3
Description: Serial upper
temp1¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 1
temp10¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 10
temp2¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 2
temp3¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 3
temp4¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 4
temp5¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 5
temp6¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 6
temp7¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 7
temp8¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 8
temp9¶
- IDL_Type
double
- Units
Celsius
- Count
3
Description: Board temperature 9
fp_RebTotalPower¶
- EFDB_Topic
CCCamera_fp_RebTotalPower
rebTotalPower¶
- IDL_Type
double
- Units
Watt
Description: Reb Total Power
rebpower_Rebps¶
- EFDB_Topic
CCCamera_rebpower_Rebps
boardTemp0¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 0
boardTemp1¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 1
boardTemp2¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 2
boardTemp3¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 3
boardTemp4¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 4
boardTemp5¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 5
boardTemp6¶
- IDL_Type
double
- Units
Celsius
Description: Board temperature 6
location¶
- IDL_Type
string
- Units
unitless
Description: Rebps Location
vacuum_Rtds¶
- EFDB_Topic
CCCamera_vacuum_Rtds
temperatureCold1¶
- IDL_Type
double
- Units
Celsius
Description: Cold Plate B Temperature
temperatureCold2¶
- IDL_Type
double
- Units
Celsius
Description: Cold Plate A Temperature
temperatureCryo¶
- IDL_Type
double
- Units
Celsius
Description: Cryo Plate Temperature
fp_Segment¶
- EFDB_Topic
CCCamera_fp_Segment
i¶
- IDL_Type
double
- Units
mA
- Count
144
Description: Amplifier current
location¶
- IDL_Type
string
- Units
unitless
Description: Segment Location
daq_monitor_Store¶
- EFDB_Topic
CCCamera_daq_monitor_Store
capacity¶
- IDL_Type
double
- Units
Gbyte
Description: total disk space
freeSpace¶
- IDL_Type
double
- Units
Gbyte
Description: available disk space
freeFraction¶
- IDL_Type
double
- Units
unitless
Description: available-space fraction
vacuum_Turbo¶
- EFDB_Topic
CCCamera_vacuum_Turbo
rpm¶
- IDL_Type
double
- Units
unitless
Description: TurboPump speed (RPM)
power¶
- IDL_Type
double
- Units
Watt
Description: TurboPump power
voltage¶
- IDL_Type
double
- Units
Volt
Description: TurboPump voltage
pumpTemperature¶
- IDL_Type
double
- Units
Celsius
Description: TurboPump pump temperature
status¶
- IDL_Type
double
- Units
unitless
Description: TurboPump status: 5=normal, 6=fail
cntrlrSinkTemperature¶
- IDL_Type
double
- Units
Celsius
Description: TurboPump controller sink temp.
driveFrequency¶
- IDL_Type
double
- Units
Hz
Description: TurboPump drive freq.
current¶
- IDL_Type
double
- Units
mA
Description: TurboPump current
cntrlrAirTemperature¶
- IDL_Type
double
- Units
Celsius
Description: TurboPump controller air temp.
vacuum_VQMonitor¶
- EFDB_Topic
CCCamera_vacuum_VQMonitor
vqmpressure¶
- IDL_Type
double
- Units
Torr
Description: VQM Pressure Reading
bonnShutter¶
- EFDB_Topic
CCCamera_bonnShutter
shutter5V¶
- IDL_Type
float
- Units
volt
Description: Measured 5v supply coltage to bonn shutter
shutter36V¶
- IDL_Type
float
- Units
volt
Description: Measured 24v supply voltage to bonn shutter
filterChanger¶
- EFDB_Topic
CCCamera_filterChanger
motorTemperature¶
- IDL_Type
float
- Units
Celsius
Description: Measured motor temperature provided by motor controller
motorEncoder¶
- IDL_Type
float
- Units
unitless
Description: Relative position based on motor travel since startup
linearPosition¶
- IDL_Type
float
- Units
unitless
Description: Filter changer position measured by linear encoder (0.005 mm)