MTMount

Note

This page is generated by python script generate_cet.py.

Back to table

Commands

clearError

Description: Clear one or more latched error conditions.

EFDB_Topic:

MTMount_command_clearError

mask

IDL_Type:

long

Units:

unitless

Description: Bitmask of Subsystem enumeration values specifying which errors to clear.

closeMirrorCovers

Description: Close the mirror covers to protect the mirrors. Warning: This terminology may be the opposite of that used by the Engineering User Interface.

EFDB_Topic:

MTMount_command_closeMirrorCovers

disableCameraCableWrapFollowing

Description: Stop the camera wrap from following the camera rotator (if it is doing so).

This endangers the cables in the camera cable wrap; please only issue this command if you know what you are doing.

EFDB_Topic:

MTMount_command_disableCameraCableWrapFollowing

enableCameraCableWrapFollowing

Description: Start the camera cable wrap following the camera rotator (if it is not already doing so).

The cable wrap drive must be on in order for this to succeed.

EFDB_Topic:

MTMount_command_enableCameraCableWrapFollowing

homeBothAxes

Description: Home the elevation and azimuth axes. You must call this after powering on the main axes before you can move them.

EFDB_Topic:

MTMount_command_homeBothAxes

moveToTarget

Description: Go to a specified position and stop.

EFDB_Topic:

MTMount_command_moveToTarget

azimuth

IDL_Type:

double

Units:

deg

Description: Azimuth angle.

elevation

IDL_Type:

double

Units:

deg

Description: Elevation angle.

openMirrorCovers

Description: Open the mirror covers to allow light in. Warning: This terminology may be the opposite of that used by the Engineering User Interface.

EFDB_Topic:

MTMount_command_openMirrorCovers

setThermal

Description: Control one or more thermal systems.

EFDB_Topic:

MTMount_command_setThermal

azimuthDrivesState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum.

elevationDrivesState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum.

cabinet0101State

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum.

mainCabinetState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum.

auxiliaryCabinetsState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum. Note that the MobBus thermal controller is always on or in fault, so mode=Off is ignored.

oilSupplySystemCabinetState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum. Note that the MobBus thermal controller is always on or in fault, so mode=Off is ignored.

topEndChillerState

IDL_Type:

short

Units:

unitless

Description: Desired thermal state; a ThermalCommandState enum.

azimuthDrivesSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

elevationDrivesSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

cabinet0101Setpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

mainCabinetSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

auxiliaryCabinetsSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

oilSupplySystemCabinetSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

topEndChillerSetpoint

IDL_Type:

double

Units:

deg_C

Description: Desired temperature; only used if the corresponding state is On.

startTracking

Description: Enable tracking. Once you issue this command you must call trackTarget at regular intervals until you are done tracking, at which point call stopTracking.

EFDB_Topic:

MTMount_command_startTracking

stop

Description: Stop all motion.

EFDB_Topic:

MTMount_command_stop

stopTracking

Description: Halt the azimuth and elevation axes and disable tracking.

EFDB_Topic:

MTMount_command_stopTracking

trackTarget

Description: Specify position, velocity and time (PVT) vector for all axes. This command is immediately reported as done.

EFDB_Topic:

MTMount_command_trackTarget

azimuth

IDL_Type:

double

Units:

deg

Description: Mount azimuth at the specified time. The allowed range is the software limits (L1), approximately -270 to 270.

azimuthVelocity

IDL_Type:

double

Units:

deg/second

Description: Mount azimuth velocity at the specified time.

elevation

IDL_Type:

double

Units:

deg

Description: Mount elevation at the specified time.

elevationVelocity

IDL_Type:

double

Units:

deg/second

Description: Mount elevation velocity at the specified time.

taiTime

IDL_Type:

double

Units:

second

Description: TAI date at which the commanded positions and velocities apply, as unix time.

trackId

IDL_Type:

long

Units:

unitless

Description: Target identifier. Metadata that is ignored by the MTMount CSC except to echo it in the target event.

tracksys

IDL_Type:

string

Units:

unitless

Description: Tracking coordinate system; one of sidereal, non-sidereal or local. Metadata that is ignored by the MTMount CSC except to echo it in the target event.

radesys

IDL_Type:

string

Units:

unitless

Description: Coordinate reference frame of RA/DEC axes. Metadata that is ignored by the MTMount CSC except to echo it in the target event.

disable

Description: Transition from state Enabled to Disabled.

EFDB_Topic:

SALGeneric_command_disable

Category:

csc

enable

Description: Transition from state Disabled to Enabled.

EFDB_Topic:

SALGeneric_command_enable

Category:

csc

exitControl

Description: Transition from state Standby to Offline. Most CSCs will quit, but CSCs that support the enterControl command will keep running.

EFDB_Topic:

SALGeneric_command_exitControl

Category:

csc

setAuthList

Description: Specify who can command this CSC.

EFDB_Topic:

SALGeneric_command_setAuthList

Category:

csc

authorizedUsers

IDL_Type:

string

Units:

unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC,

in the form user@host. If the first character is +/- then the specified users are added/removed. Duplicates are silently ignored. The CSC’s own user@host is silently ignored, because it is always authorized. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

nonAuthorizedCSCs

IDL_Type:

string

Units:

unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC,

in the form name[:index]. An index of 0 is stripped (name:0 becomes name). If the first character is +/- then the specified CSCs are added/removed. Duplicates are silently ignored. For removal, CSCs that are not in the list are silently ignored. Whitespace is allowed after the optional initial +/- and after each comma.

setLogLevel

Description: Set the logging level.

EFDB_Topic:

SALGeneric_command_setLogLevel

Category:

csc

level

IDL_Type:

int

Units:

unitless

Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.

subsystem

IDL_Type:

string

Units:

unitless

Description: If this CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to this CSC itself.

standby

Description: Transition from state Offline/Available, Disabled or Fault to Standby.

EFDB_Topic:

SALGeneric_command_standby

Category:

csc

start

Description: Transition from state Standby to Disable, in a specified configuration.

EFDB_Topic:

SALGeneric_command_start

Category:

csc

configurationOverride

IDL_Type:

string

Units:

unitless

Description:

Configuration override in the form [{name}][:{version}]. For salobj-based CSCs: name is a filename with “.yaml” suffix and version is a git hash; for example:

• “foo.yaml” specifies just a file. Two or three config files are loaded: “_init.yaml”, “_{site}.yaml” (if present), and “foo.yaml”.

• “:37bf936” specifies just a git hash. One or two config files are loaded from the specified git commit: “_init.yaml” and “_{site}.yaml” (if present.

• “bar.yaml:HEAD~2” specifies both a file and a git hash. Two or three config files are read from the specified git commit: “_init.yaml”, “_{site}.yaml” (if present), and “bar.yaml”.

Enumerations

AxisMotionState:

• Stopping=0

• Stopped=1

• MovingPointToPoint=2

• Jogging=3

• Tracking=4

• TrackingPaused=5

Commander:

• None=0

• CSC=1

• EUI=2

• HHD=3

DeployableMotionState:

• Retracted=0

• Deployed=1

• Retracting=2

• Deploying=3

• Lost=4

LimitsMask:

• L1Min=0x1

• L1Max=0x2

• L2Min=0x4

• L2Max=0x8

• L3Min=0x10

• L3Max=0x20

• AdjustableL1Min=0x40

• AdjustableL1Max=0x80

• OperationalL2Min=0x100

• OperationalL2Max=0x200

• CameraCableWrapFollowL3Min=0x400

• CameraCableWrapFollowL3Max=0x800

ElevationLockingPinMotionState:

• Locked=0

• Test=1

• Unlocked=2

• Moving=3

• Mismatch=4

PowerState:

• Off=0

• On=1

• Fault=2

• TurningOn=3

• TurningOff=4

• Unknown=15

System:

• Azimuth=0

• Elevation=1

• CameraCableWrap=2

• Balance=3

• MirrorCovers=4

• MirrorCoverLocks=5

• AzimuthCableWrap=6

• LockingPins=7

• DeployablePlatforms=8

• OilSupplySystem=9

• AzimuthDrivesThermal=10

• ElevationDrivesThermal=11

• Cabinet0101Thermal=12

• AuxiliaryCabinetsThermal=13

• MainCabinetThermal=14

• MainAxesPowerSupply=15

• TopEndChiller=16

ThermalCommandState:

• NoChange = 0

• Off = 1

• On = 2

Events

auxiliaryCabinetsThermalSystemState

Description: State of the auxiliary cabinets thermal control system.

EFDB_Topic:

MTMount_logevent_auxiliaryCabinetsThermalSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

5

Description: Power state of each element; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Count:

5

Description: Is setTemperature the ambient temperature (true=yes).

setTemperature

IDL_Type:

double

Units:

deg_C

Count:

5

Description: Temperature set point.

availableSettings

Description: Available low-level controller settings.

EFDB_Topic:

MTMount_logevent_availableSettings

names

IDL_Type:

string

Units:

unitless

Description: Comma-separated names.

descriptions

IDL_Type:

string

Units:

unitless

Description: Comma-separated descriptions.

createdDates

IDL_Type:

string

Units:

unitless

Description: Comma-separated created dates (ISO format).

modifiedDates

IDL_Type:

string

Units:

unitless

Description: Comma-separated modified dates (ISO format).

azimuthCableWrapSystemState

Description: State of the azimuth cable wrap system.

EFDB_Topic:

MTMount_logevent_azimuthCableWrapSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each motion controller; a PowerState enum.

azimuthControllerSettings

Description: A selection of low-level controller settings for the azimuth axis.

EFDB_Topic:

MTMount_logevent_azimuthControllerSettings

minCmdPositionEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min command position limit enabled?

maxCmdPositionEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max command position limit enabled?

minL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min L1 (software) limit enabled?

maxL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max L1 (software) limit enabled?

minOperationalL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min operational L1 (software) limit enabled. If true then minL1Limit is the operational limit, else it is the wider limit. Note that the TMA calls these “Adjustable” limits.

maxOperationalL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max operational L1 (software) limit enabled. If true then maxL1Limit is the operational limit, else it is the wider limit. Note that the TMA calls these “Adjustable” limits.

minL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min L2 (direction inhibit) limit switch enabled?

maxL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max L2 (direction inhibit) limit switch enabled?

minCmdPosition

IDL_Type:

double

Units:

deg

Description: Minimum commanded position. Ignored if minCmdPositionLimitEnabled is false.

maxCmdPosition

IDL_Type:

double

Units:

deg

Description: Maximum commanded position. Ignored if maxCmdPositionLimitEnabled is false.

minL1Limit

IDL_Type:

double

Units:

deg

Description: Minimum L1 (software) position limit. The value depends on minOperationalL1LimitEnabled. Ignored if minOperationalL1LimitEnabled and minL1LimitEnabled are both false.

maxL1Limit

IDL_Type:

double

Units:

deg

Description: Maximum L1 (software) position limit. The value depends on maxOperationalL1LimitEnabled. Ignored if maxOperationalL1LimitEnabled and maxL1LimitEnabled are both false.

maxCmdVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum commanded abs(velocity).

maxMoveVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for point to point moves.

maxMoveAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for point to point moves.

maxMoveJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for point to point moves.

maxTrackingVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for slewing and tracking.

maxTrackingAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for slewing and tracking.

maxTrackingJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for slewing and tracking.

azimuthDrivesThermalSystemState

Description: State of the azimuth drive thermal control system.

EFDB_Topic:

MTMount_logevent_azimuthDrivesThermalSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each element; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Count:

4

Description: Is setTemperature the ambient temperature (true=yes), per element.

setTemperature

IDL_Type:

double

Units:

deg_C

Count:

4

Description: Temperature set point per element.

azimuthHomed

Description: Has the azimuth axis been homed?

EFDB_Topic:

MTMount_logevent_azimuthHomed

homed

IDL_Type:

boolean

Units:

unitless

Description: Has the axis been homed? (false=no, true=yes).

azimuthInPosition

Description: Is the azimuth axis in position? If tracking, in position means the slew is done and the axes are now tracking the target.

EFDB_Topic:

MTMount_logevent_azimuthInPosition

inPosition

IDL_Type:

boolean

Units:

unitless

Description: Is the axis in position?

azimuthLimits

Description: State of the limits for the azimuth axis.

EFDB_Topic:

MTMount_logevent_azimuthLimits

limits

IDL_Type:

unsigned int

Units:

unitless

Description: Limits, as a LimitsMask enum mask.

azimuthMotionState

Description: Motion state of the azimuth axis.

EFDB_Topic:

MTMount_logevent_azimuthMotionState

state

IDL_Type:

long

Units:

unitless

Description: Motion state, as an AxisMotionState enum.

azimuthSystemState

Description: State of the azimuth system.

EFDB_Topic:

MTMount_logevent_azimuthSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

16

Description: Power state of each motion controller; a PowerState enum.

azimuthToppleBlock

Description: State of the topple block for the azimuth axis.

EFDB_Topic:

MTMount_logevent_azimuthToppleBlock

reverse

IDL_Type:

boolean

Units:

unitless

Description: Is the reverse topple block switch active?

forward

IDL_Type:

boolean

Units:

unitless

Description: Is the forward topple block switch active?

balanceSystemState

Description: State of the balance system.

EFDB_Topic:

MTMount_logevent_balanceSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Overall power state of the balancing system; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each drive system; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each motion controller; a PowerState enum.

cabinet0101ThermalSystemState

Description: State of azimuth cabinet 0101 thermal control system.

EFDB_Topic:

MTMount_logevent_cabinet0101ThermalSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Description: Is setTemperature the ambient temperature (true=yes).

setTemperature

IDL_Type:

double

Units:

deg_C

Description: Temperature set point.

cameraCableWrapControllerSettings

Description: A selection of low-level controller settings for the camera cable wrap.

EFDB_Topic:

MTMount_logevent_cameraCableWrapControllerSettings

minL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Is the minimum L1 (software) position limit enabled?

maxL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Is the maximum L1 (software) position limit enabled?

minL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Is the minimum L2 (direction inhibit) limit switch enabled?

maxL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Is the maximum` L2 (direction inhibit) limit switch enabled?

minCmdPosition

IDL_Type:

double

Units:

deg

Description: Minimum commanded position. Ignored if minCmdPositionLimitEnabled is false.

maxCmdPosition

IDL_Type:

double

Units:

deg

Description: Maximum commanded position. Ignored if maxCmdPositionLimitEnabled is false.

minL1Limit

IDL_Type:

double

Units:

deg

Description: Minimum L1 (software) position limit. The value depends on minOperationalL1LimitEnabled. Ignored if minOperationalL1LimitEnabled and minL1LimitEnabled are both false.

maxL1Limit

IDL_Type:

double

Units:

deg

Description: Maximum L1 (software) position limit. The value depends on maxOperationalL1LimitEnabled. Ignored if maxOperationalL1LimitEnabled and maxL1LimitEnabled are both false.

maxCmdVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum commanded abs(velocity).

maxMoveVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for point to point moves.

maxMoveAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for point to point moves.

maxMoveJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for point to point moves.

maxTrackingVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for slewing and tracking.

maxTrackingAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for slewing and tracking.

maxTrackingJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for slewing and tracking.

cameraCableWrapFollowing

Description: Is camera cable wrap following enabled?

EFDB_Topic:

MTMount_logevent_cameraCableWrapFollowing

enabled

IDL_Type:

long

Units:

unitless

Description: If true (1) the camera cable wrap is trying to follow the rotator.

If false (0) that code is not running. The field type should be “boolean”, and we may change someday if we figure out how to migrate old data.

cameraCableWrapInPosition

Description: Is the camera cable wrap in position? If tracking, in position means the slew is done and the axis is now tracking the target.

EFDB_Topic:

MTMount_logevent_cameraCableWrapInPosition

inPosition

IDL_Type:

boolean

Units:

unitless

Description: In position?

cameraCableWrapLimits

Description: State of the limits for the camera cable wrap.

EFDB_Topic:

MTMount_logevent_cameraCableWrapLimits

limits

IDL_Type:

unsigned int

Units:

unitless

Description: Camera cable wrap limits, as a LimitsMask enum mask.

cameraCableWrapMotionState

Description: Motion state of the camera cable wrap.

EFDB_Topic:

MTMount_logevent_cameraCableWrapMotionState

state

IDL_Type:

long

Units:

unitless

Description: Motion state, as an AxisMotionState enum.

cameraCableWrapSystemState

Description: State of the cameraCableWrap system.

EFDB_Topic:

MTMount_logevent_cameraCableWrapSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each motion controller; a PowerState enum.

cameraCableWrapTarget

Description: Commanded position and velocity.

EFDB_Topic:

MTMount_logevent_cameraCableWrapTarget

position

IDL_Type:

double

Units:

deg

Description: Target camera cable wrap position.

velocity

IDL_Type:

double

Units:

deg/second

Description: Target camera cable wrap velocity.

taiTime

IDL_Type:

double

Units:

second

Description: TAI date at which the commanded positions and velocities apply, as unix time.

commander

Description: Who controls the low-level controller.

EFDB_Topic:

MTMount_logevent_commander

commander

IDL_Type:

int

Units:

unitless

Description: Who controls the low-level controller; a Commander enum.

connected

Description: State of CSC’s TCP/IP connection to the low level controller (the “operations manager”).

EFDB_Topic:

MTMount_logevent_connected

connected

IDL_Type:

boolean

Units:

unitless

Description: Is the socket connected (true=yes, false=no)?

controllerSettingsName

Description: Settings file used in the low-level controller.

EFDB_Topic:

MTMount_logevent_controllerSettingsName

settingsName

IDL_Type:

string

Units:

unitless

Description: Settings file name.

deployablePlatformsMotionState

Description: Motion state of deployable platforms.

EFDB_Topic:

MTMount_logevent_deployablePlatformsMotionState

state

IDL_Type:

unsigned short

Units:

unitless

Description: Aggregate motion state, a DeployableMotionState enum.

elementsState

IDL_Type:

unsigned short

Units:

unitless

Count:

2

Description: Motion state of each actuator, a DeployableMotionState enum.

deployablePlatformsSystemState

Description: State of the deployable platforms system. This has 2 independent elements, each controlled by 2 motion controller.

EFDB_Topic:

MTMount_logevent_deployablePlatformsSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each element; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each motion controller; a PowerState enum.

elevationControllerSettings

Description: A selection of low-level controller settings for the elevation axis.

EFDB_Topic:

MTMount_logevent_elevationControllerSettings

minCmdPositionEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min command position limit enabled?

maxCmdPositionEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max command position limit enabled?

minL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min L1 (software) limit enabled?

maxL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max L1 (software) limit enabled?

minOperationalL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min operational L1 (software) limit enabled. If true then minL1Limit is the operational limit, else it is the wider limit. Note that the TMA calls these “Adjustable” limits.

maxOperationalL1LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max operational L1 (software) limit enabled. If true then maxL1Limit is the operational limit, else it is the wider limit. Note that the TMA calls these “Adjustable” limits.

minOperationalL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min operational L2 (direction inhibit) limit switch enabled?

maxOperationalL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max operational L2 (direction inhibit) limit switch enabled?

minL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Min L2 (direction inhibit) limit switch enabled?

maxL2LimitEnabled

IDL_Type:

boolean

Units:

unitless

Description: Max L2 (direction inhibit) limit switch enabled?

minCmdPosition

IDL_Type:

double

Units:

deg

Description: Minimum commanded position. Ignored if minCmdPositionLimitEnabled is false.

maxCmdPosition

IDL_Type:

double

Units:

deg

Description: Maximum commanded position. Ignored if maxCmdPositionLimitEnabled is false.

minL1Limit

IDL_Type:

double

Units:

deg

Description: Minimum L1 (software) position limit. The value depends on minOperationalL1LimitEnabled. Ignored if minOperationalL1LimitEnabled and minL1LimitEnabled are both false.

maxL1Limit

IDL_Type:

double

Units:

deg

Description: Maximum L1 (software) position limit. The value depends on maxOperationalL1LimitEnabled. Ignored if maxOperationalL1LimitEnabled and maxL1LimitEnabled are both false.

maxCmdVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum commanded abs(velocity).

maxMoveVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for point to point moves.

maxMoveAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for point to point moves.

maxMoveJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for point to point moves.

maxTrackingVelocity

IDL_Type:

double

Units:

deg/s

Description: Maximum abs(velocity) used for slewing and tracking.

maxTrackingAcceleration

IDL_Type:

double

Units:

deg/s2

Description: Maximum abs(acceleration) used for slewing and tracking.

maxTrackingJerk

IDL_Type:

double

Units:

deg/s3

Description: Maximum abs(jerk) used for slewing and tracking.

elevationDrivesThermalSystemState

Description: State of the elevation drive thermal control system.

EFDB_Topic:

MTMount_logevent_elevationDrivesThermalSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each element; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Count:

2

Description: Is setTemperature the ambient temperature (true=yes), per element.

setTemperature

IDL_Type:

double

Units:

deg_C

Count:

2

Description: Temperature set point per element.

elevationHomed

Description: Has the elevation axis been homed?

EFDB_Topic:

MTMount_logevent_elevationHomed

homed

IDL_Type:

boolean

Units:

unitless

Description: Has the axis been homed? (false=no, true=yes).

elevationInPosition

Description: Is the elevation axis in position? If tracking, in position means the slew is done and the axes are now tracking the target.

EFDB_Topic:

MTMount_logevent_elevationInPosition

inPosition

IDL_Type:

boolean

Units:

unitless

Description: Is the axis in position?

elevationLimits

Description: State of the limits for the elevation axis.

EFDB_Topic:

MTMount_logevent_elevationLimits

limits

IDL_Type:

unsigned int

Units:

unitless

Description: Limits, as a LimitsMask enum mask.

elevationLockingPinMotionState

Description: Motion state of elevation locking pin.

EFDB_Topic:

MTMount_logevent_elevationLockingPinMotionState

state

IDL_Type:

unsigned short

Units:

unitless

Description: Aggregate motion state, an ElevationLockingPinMotionState enum.

elementsState

IDL_Type:

unsigned short

Units:

unitless

Count:

2

Description: Motion state of each actuator, an ElevationLockingPinMotionState enum.

elevationMotionState

Description: Motion state of the elevation axis.

EFDB_Topic:

MTMount_logevent_elevationMotionState

state

IDL_Type:

long

Units:

unitless

Description: Motion state, as an AxisMotionState enum.

elevationSystemState

Description: State of the elevation system.

EFDB_Topic:

MTMount_logevent_elevationSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

12

Description: Power state of each motion controller; a PowerState enum.

error

Description: State of an error (identified by the code field).

EFDB_Topic:

MTMount_logevent_error

latched

IDL_Type:

boolean

Units:

unitless

Description: Is the error condition latched on (as it been active since it was last reset)?

active

IDL_Type:

boolean

Units:

unitless

Description: Is the error condition present?

code

IDL_Type:

long

Units:

unitless

Description: Error identifier code.

text

IDL_Type:

string

Units:

unitless

Description: Text description of error.

subsystem

IDL_Type:

long

Units:

unitless

Description: Subsystem that produced the error; a single System enumeration value.

lockingPinsSystemState

Description: State of the locking pins system. This has 2 independent elements, each controlled by one motion controller.

EFDB_Topic:

MTMount_logevent_lockingPinsSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each element; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

2

Description: Power state of each motion controller; a PowerState enum.

mainAxesPowerSupplySystemState

Description: State of the main axes power supply system.

EFDB_Topic:

MTMount_logevent_mainAxesPowerSupplySystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

mainCabinetThermalSystemState

Description: State of the main cabinet system.

EFDB_Topic:

MTMount_logevent_mainCabinetThermalSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Description: Is setTemperature the ambient temperature (true=yes).

setTemperature

IDL_Type:

double

Units:

deg_C

Description: Temperature set point.

mirrorCoverLocksMotionState

Description: Motion state of the mirror cover locks.

EFDB_Topic:

MTMount_logevent_mirrorCoverLocksMotionState

state

IDL_Type:

unsigned short

Units:

unitless

Description: Aggregate motion state, a DeployableMotionState enum.

elementsState

IDL_Type:

unsigned short

Units:

unitless

Count:

4

Description: Motion state of each mirror cover, a DeployableMotionState enum.

mirrorCoverLocksSystemState

Description: State of the mirror cover locks system. This has 4 independent elements, each controlled by one motion controller.

EFDB_Topic:

MTMount_logevent_mirrorCoverLocksSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each element; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each motion controller; a PowerState enum.

mirrorCoversMotionState

Description: Motion state of the mirror covers.

EFDB_Topic:

MTMount_logevent_mirrorCoversMotionState

state

IDL_Type:

unsigned short

Units:

unitless

Description: Aggregate motion state, a DeployableMotionState enum.

elementsState

IDL_Type:

unsigned short

Units:

unitless

Count:

4

Description: Motion state of each mirror cover lock, a DeployableMotionState enum.

mirrorCoversSystemState

Description: State of the mirror covers system. This has 4 independent elements, each controlled by one motion controller.

EFDB_Topic:

MTMount_logevent_mirrorCoversSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

elementPowerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each element; a PowerState enum.

motionControllerState

IDL_Type:

int

Units:

unitless

Count:

4

Description: Power state of each motion controller; a PowerState enum.

oilSupplySystemState

Description: State of the deployable platform system.

EFDB_Topic:

MTMount_logevent_oilSupplySystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Overall power state; a PowerState enum.

coolingPowerState

IDL_Type:

int

Units:

unitless

Description: Power state of the oil cooling system; a PowerState enum.

circulationPumpPowerState

IDL_Type:

int

Units:

unitless

Description: Power state of the oil circulation pump system; a PowerState enum.

mainPumpPowerState

IDL_Type:

int

Units:

unitless

Description: Power state of the oil main pump system; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Count:

3

Description: Is setTemperature the ambient temperature (true=yes), per element.

setTemperature

IDL_Type:

double

Units:

deg_C

Count:

3

Description: Temperature set point.

safetyInterlocks

EFDB_Topic:

MTMount_logevent_safetyInterlocks

causes

IDL_Type:

long long

Units:

unitless

Description: A bit map for safety causes.

subcausesEmergencyStop

IDL_Type:

long long

Units:

unitless

Description: A bit map emergency stop buttons.

subcausesLimitSwitch

IDL_Type:

long long

Units:

unitless

Description: A bit map for limit switches.

subcausesDeployablePlatform

IDL_Type:

long long

Units:

unitless

Description: A bit map for deployable platform switches.

subcausesDoorHatchLadder

IDL_Type:

long long

Units:

unitless

Description: A bit map for door, hatch and ladder status.

subcausesMirrorCover

IDL_Type:

long long

Units:

unitless

Description: A bit map for mirror cover power off switches.

subcausesLockingPin

IDL_Type:

long long

Units:

unitless

Description: A bit map for locking pin positions.

subcausesCapacitorDoor

IDL_Type:

long long

Units:

unitless

Description: A bit map for phase capacitor bank doors.

subcausesBrakesFailed

IDL_Type:

long long

Units:

unitless

Description: A bit map for brakes that failed.

effects

IDL_Type:

long long

Units:

unitless

Description: A bit map for safety effects.

target

Description: Commanded position and velocity.

EFDB_Topic:

MTMount_logevent_target

elevation

IDL_Type:

double

Units:

deg

Description: Target mount elevation at the specified time.

elevationVelocity

IDL_Type:

double

Units:

deg/second

Description: Target mount elevation velocity at the specified time.

azimuth

IDL_Type:

double

Units:

deg

Description: Target mount azimuth at the specified time. The allowed range is 0 to 360.

azimuthVelocity

IDL_Type:

double

Units:

deg/second

Description: Target mount azimuth velocity at the specified time.

taiTime

IDL_Type:

double

Units:

second

Description: TAI date at which the commanded positions and velocities apply, as unix time.

trackId

IDL_Type:

long

Units:

unitless

Description: Unique target identifier. Echoed from the trackTarget command.

tracksys

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: Coordinate system of target: one of sidereal, non-sidereal or local. Echoed from the trackTarget command.

radesys

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: Coordinate reference frame of RA/DEC axes (e.g. ICRS or FK5). Echoed from the trackTarget command.

telemetryConnected

Description: State of telemetry client’s TCP/IP connection to the low level telemetry server.

EFDB_Topic:

MTMount_logevent_telemetryConnected

connected

IDL_Type:

boolean

Units:

unitless

Description: Is the socket connected (true=yes, false=no)?

topEndChillerSystemState

Description: State of the top end chiller system.

EFDB_Topic:

MTMount_logevent_topEndChillerSystemState

powerState

IDL_Type:

int

Units:

unitless

Description: Power state; a PowerState enum.

trackAmbient

IDL_Type:

boolean

Units:

unitless

Description: Is setTemperature the ambient temperature (true=yes).

setTemperature

IDL_Type:

double

Units:

deg_C

Description: Temperature set point.

warning

Description: State of a warning (dentified by the code field).

EFDB_Topic:

MTMount_logevent_warning

active

IDL_Type:

boolean

Units:

unitless

Description: Is the warning condition present?

code

IDL_Type:

long

Units:

unitless

Description: Warning identifier code.

text

IDL_Type:

string

Units:

unitless

Description: Text description of warning.

subsystem

IDL_Type:

long

Units:

unitless

Description: Subsystem that produced the warning; a single System enumeration value.

authList

Description: Who can command this CSC.

EFDB_Topic:

SALGeneric_logevent_authList

Category:

csc

authorizedUsers

IDL_Type:

string

Units:

unitless

Description: Comma seperated list of authorized users currently allowed to command this CSC.

nonAuthorizedCSCs

IDL_Type:

string

Units:

unitless

Description: Comma seperated list of CSC’s not currently allowed to command this CSC.

clockOffset

Description: Clock error between a low-level controller and its CSC. Only relevant to CSCs that control a single low-level controller.

EFDB_Topic:

SALGeneric_logevent_clockOffset

offset

IDL_Type:

double

Units:

second

Description: Low-level controller time - CSC time. For most CSCs this is only accurate to 0.01 seconds or so, and thus is only intended to detect gross error.

configurationApplied

Description: Information about this CSC’s current configuration overrides.

EFDB_Topic:

SALGeneric_logevent_configurationApplied

Category:

configurable

configurations

IDL_Type:

string

Units:

unitless

Description: A comma-separated list of configurations applied. If configuration comes from a clone of a git repo, or similar directory, then it will be a list of file names, without the file extension. Ignore whitespace after commas.

version

IDL_Type:

string

Units:

unitless

Description: Version of the configuration source. For a clone of a git repo it will be a git hash.

url

IDL_Type:

string

Units:

unitless

Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL. This should always match the same-named field in configurationsAvailable.

schemaVersion

IDL_Type:

string

Units:

unitless

Description: Version of config schema used by this CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”. This should always match the same-named field in configurationsAvailable.

otherInfo

IDL_Type:

string

Units:

unitless

Description: A comma-separated list of event topics (without the logevent prefix) used to publish the entire set of configuration parameters loaded by this CSC, and any other pertinent information. Ignore whitespace after commas.

configurationsAvailable

Description: Available configuration overrides for this CSC.

EFDB_Topic:

SALGeneric_logevent_configurationsAvailable

Category:

configurable

overrides

IDL_Type:

string

Units:

unitless

Description: Available overrides as a comma-separated list. Each entry is a possible value of the configurationOverride field of the start command. Ignore whitespace after commas.

version

IDL_Type:

string

Units:

unitless

Description: Version of the configuration source. For a clone of a git repo it will be a git hash.

url

IDL_Type:

string

Units:

unitless

Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL.

schemaVersion

IDL_Type:

string

Units:

unitless

Description: Version of config schema used by this CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”.

errorCode

Description: Output when this CSC goes into the Fault state as an explanation of the problem.

EFDB_Topic:

SALGeneric_logevent_errorCode

Category:

csc

errorCode

IDL_Type:

long

Units:

unitless

Description: A numeric error code.

errorReport

IDL_Type:

string

Units:

unitless

Description: An string providing detailed information about the error.

traceback

IDL_Type:

string

Units:

unitless

Description: An optional stack trace of the error condition.

heartbeat

Description: Event output at regular intervals (typcally once per second) to show that the SAL component is alive.

EFDB_Topic:

SALGeneric_logevent_heartbeat

Category:

mandatory

heartbeat

IDL_Type:

boolean

Units:

unitless

Description: Deprecated field that you should ignore.

logLevel

Description: Current logging level.

EFDB_Topic:

SALGeneric_logevent_logLevel

Category:

mandatory

level

IDL_Type:

int

Units:

unitless

Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.

subsystem

IDL_Type:

string

Units:

unitless

Description: If this CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to this CSC itself.

logMessage

Description: A log message.

EFDB_Topic:

SALGeneric_logevent_logMessage

Category:

mandatory

name

IDL_Type:

string

Units:

unitless

Description: Log name.

level

IDL_Type:

int

Units:

unitless

Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.

message

IDL_Type:

string

Units:

unitless

Description: Log message.

traceback

IDL_Type:

string

Units:

unitless

Description: Exception traceback; “” if not an exception.

filePath

IDL_Type:

string

Units:

unitless

Description: Path to source file.

functionName

IDL_Type:

string

Units:

unitless

Description: Function or method name.

lineNumber

IDL_Type:

long

Units:

unitless

Description: Line number in the file specified by filePath.

process

IDL_Type:

long

Units:

unitless

Description: Process ID.

timestamp

IDL_Type:

double

Units:

second

Description: The time at which the condition being reported was observed (TAI unix seconds). 0 if unspecified.

simulationMode

Description: Current simulation mode.

EFDB_Topic:

SALGeneric_logevent_simulationMode

Category:

csc

mode

IDL_Type:

int

Units:

unitless

Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.

softwareVersions

Description: Current versions of software in use by CSC.

EFDB_Topic:

SALGeneric_logevent_softwareVersions

Category:

mandatory

salVersion

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: This is the current version of SAL generation.

xmlVersion

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: This is the current version of CSC XML.

openSpliceVersion

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: This is the current version of OpenSplice.

cscVersion

IDL_Type:

string

IDL_Size:

256

Units:

unitless

Description: The software version of this CSC.

subsystemVersions

IDL_Type:

string

Units:

unitless

Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within this CSC.

summaryState

Description: Current summary state of this CSC.

EFDB_Topic:

SALGeneric_logevent_summaryState

Category:

csc

summaryState

IDL_Type:

long

Units:

unitless

Description: High level state machine state identifier.

Telemetry

auxiliaryCabinetsThermal

EFDB_Topic:

MTMount_auxiliaryCabinetsThermal

actualTemperatureAzimuthDriveCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Actual temperature of the cabinet TMA_AZ_DR_CBT_0001.

actualTemperatureAzimuthPowerDistributionCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Actual temperature of the cabinet TMA_AZ_PD_CBT_0001.

actualTemperatureAzimuthPowerDistributionTransformer0001

IDL_Type:

double

Units:

deg_C

Description: Actual temperature of the cabinet TMA_AZ_PD_TRM_0001.

actualTemperatureElevationPowerDistributionCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Actual temperature of the cabinet TMA_EL_PD_CBT_0001.

actualTemperatureElevationPowerDistributionCabinet0002

IDL_Type:

double

Units:

deg_C

Description: Actual temperature of the cabinet TMA_EL_PD_CBT_0002.

setpointTemperatureAzimuthDZCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of the cabinet TMA_AX_DZ_CBT_0001.

setpointTemperatureAzimuthPowerDistributionCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of the cabinet TMA_AZ_PD_CBT_0001.

setpointTemperatureAzimuthPowerDistributionTransformer0001

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of the cabinet TMA_AZ_PD_TRM_0001.

setpointTemperatureElevationPowerDistributionCabinet0001

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of the cabinet TMA_EL_PD_CBT_0001.

setpointTemperatureElevationPowerDistributionCabinet0002

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of the cabinet TMA_EL_PD_CBT_0002.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

azimuth

EFDB_Topic:

MTMount_azimuth

actualPosition

IDL_Type:

double

Units:

deg

Description: Actual position used by the position control loop.

actualTorque

IDL_Type:

double

Units:

N m

Description: Actual torque.

actualVelocity

IDL_Type:

double

Units:

deg/s

Description: Actual velocity.

demandPosition

IDL_Type:

double

Units:

deg

Description: Demand position.

demandVelocity

IDL_Type:

double

Units:

deg/s

Description: Demand velocity.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

azimuthCableWrap

EFDB_Topic:

MTMount_azimuthCableWrap

actualPositionDrive

IDL_Type:

double

Units:

%

Count:

2

Description: Actual position reported by each drive.

actualVelocityDrive

IDL_Type:

double

Units:

deg/s

Count:

2

Description: Actual velocity reported by each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

azimuthDrives

EFDB_Topic:

MTMount_azimuthDrives

current

IDL_Type:

double

Units:

A

Count:

16

Description: Actual current of each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

azimuthDrivesThermal

EFDB_Topic:

MTMount_azimuthDrivesThermal

actualTemperature

IDL_Type:

double

Units:

deg_C

Count:

16

Description: Actual surface temperature of each drive.

actualValvePositionAzimuth

IDL_Type:

double

Units:

%

Count:

4

Description: Actual position (% open) for the mixing valve of each azimuth temperature controller.

setpointTemperature

IDL_Type:

double

Units:

deg_C

Count:

4

Description: Setpoint surface temperature for each temperature controller.

setpointValvePositionAzimuth

IDL_Type:

double

Units:

%

Count:

4

Description: Setpoint position (% open) for the mixing valve of each azimuth temperature controller.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

balancing

EFDB_Topic:

MTMount_balancing

actualPosition

IDL_Type:

double

Units:

mm

Count:

4

Description: Actual position reported by each drive.

actualTorquePercentage

IDL_Type:

double

Units:

%

Count:

4

Description: Actual torque (percent) of each drive.

actualVelocity

IDL_Type:

double

Units:

mm/s

Count:

4

Description: Actual velocity of each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

cabinet0101Thermal

EFDB_Topic:

MTMount_cabinet0101Thermal

actualTemperature

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of cabinet 0101.

actualValvePosition

IDL_Type:

double

Units:

%

Description: Actual position of cabinet valve 0101.

setpointTemperature

IDL_Type:

double

Units:

deg_C

Description: Setpoint temperature of cabinet 0101.

setpointValvePosition

IDL_Type:

double

Units:

%

Description: Setpoint position of cabinet valve 0101.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

cameraCableWrap

EFDB_Topic:

MTMount_cameraCableWrap

actualPosition

IDL_Type:

double

Units:

deg

Description: Actual position.

actualTorquePercentage

IDL_Type:

double

Units:

%

Count:

2

Description: Actual percent torque of each drive.

actualVelocity

IDL_Type:

double

Units:

deg/s

Description: Actual velocity.

demandPosition

IDL_Type:

double

Units:

deg

Description: Demand position.

demandVelocity

IDL_Type:

double

Units:

deg/s

Description: Demand velocity.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

compressedAir

EFDB_Topic:

MTMount_compressedAir

airPressureAzimuth0001

IDL_Type:

double

Units:

bar

Description: Compressed air pressure from azimuth gauge TMA-AZ-CP-CPM-0001.

airPressureAzimuth0002

IDL_Type:

double

Units:

bar

Description: Compressed air pressure from azimuth gauge TMA-AZ-CP-CPM-0002.

airPressureElevation0001

IDL_Type:

double

Units:

bar

Description: Compressed air pressure from elevation gauge TMA-EL-CP-CPM-0001.

airPressureElevation0002

IDL_Type:

double

Units:

bar

Description: Compressed air pressure from elevation gauge TMA-EL-CP-CPM-0002.

airPressurePier0001

IDL_Type:

double

Units:

bar

Description: Compressed air pressure from pier gauge TMA-PI-CP-CPM-0001.

airTemperaturePier0001

IDL_Type:

double

Units:

deg_C

Description: Compressed air temperature from pier gauge TMA-PI-CP-CTM-0001.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

cooling

EFDB_Topic:

MTMount_cooling

glycolPressureAzimuth0001

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0001.

glycolPressureAzimuth0002

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0002.

glycolPressureAzimuth0003

IDL_Type:

double

Units:

bar

Description: Glycol water pressure at .

glycolPressureAzimuth0004

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0004.

glycolPressureAzimuth0005

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0005.

glycolPressureAzimuth0006

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0006.

glycolPressureAzimuth0007

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0007.

glycolPressureAzimuth0008

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0008.

glycolPressureAzimuth0009

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0009.

glycolPressureAzimuth0010

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0010.

glycolPressureAzimuth0011

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0011.

glycolPressureAzimuth0012

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0012.

glycolPressureAzimuth0013

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0013.

glycolPressureAzimuth0014

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0014.

glycolPressureAzimuth0015

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0015.

glycolPressureAzimuth0016

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0016.

glycolPressureAzimuth0017

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0017.

glycolPressureAzimuth0018

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0018.

glycolPressureAzimuth0019

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-001.

glycolPressureAzimuth0020

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0020.

glycolPressureAzimuth0021

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0021.

glycolPressureAzimuth0022

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-AZ-GW-CPM-0022.

glycolPressureElevation0001

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from azimuth gauge TMA-EL-GW-CPM-0001.

glycolPressureElevation0002

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from elevation gauge TMA-EL-GW-CPM-0002.

glycolPressurePier0101

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from pier gauge TMA-PI-GW-CPM-0101.

glycolPressurePier0102

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from pier gauge TMA-PI-GW-CPM-0102.

glycolTemperatureAzimuth0001

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from azimuth gauge TMA-AZ-GW-CTM-0001.

glycolTemperatureAzimuth0002

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from azimuth gauge TMA-AZ-GW-CTM-0002.

glycolTemperatureAzimuth0021

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from azimuth gauge TMA-AZ-GW-CTM-0021.

glycolTemperatureAzimuth0022

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from azimuth gauge TMA-AZ-GW-CTM-0022.

glycolTemperatureElevation0001

IDL_Type:

double

Units:

bar

Description: Glycol water pressure from elevation gauge TMA-EL-GW-CTM-0001.

glycolTemperaturePier0101

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from pier gauge TMA-PI-GW-CTM-0101.

glycolTemperaturePier0102

IDL_Type:

double

Units:

deg_C

Description: Glycol water temperature from pier gauge TMA-PI-GW-CTM-0102.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

deployablePlatforms

EFDB_Topic:

MTMount_deployablePlatforms

actualPositionPlatform1Section

IDL_Type:

double

Units:

mm

Count:

2

Description: Actual position of each section of platform 1.

actualPositionPlatform2Section

IDL_Type:

double

Units:

mm

Count:

2

Description: Actual position of each section of platform 2.

actualTorquePercentagePlatform1Drive

IDL_Type:

double

Units:

%

Count:

2

Description: Actual torque (percent) each drive of platform 1 (one drive per section).

actualTorquePercentagePlatform2Drive

IDL_Type:

double

Units:

%

Count:

2

Description: Actual torque (percent) each drive of platform 2 (one drive per section).

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

dynaleneCooling

EFDB_Topic:

MTMount_dynaleneCooling

dynalenePressureAzimuth0001

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from azimuth gauge TMA-AZ-DY-CPM-0001.

dynalenePressureAzimuth0002

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from azimuth gauge TMA-AZ-DY-CPM-0002.

dynalenePressureElevation0001

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0001.

dynalenePressureElevation0002

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0002.

dynalenePressureElevation0003

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0003.

dynalenePressureElevation0004

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0004.

dynalenePressureElevation0005

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0005.

dynalenePressureElevation0006

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0006.

dynalenePressureElevation0007

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from elevation gauge TMA-EL-DY-CPM-0007.

dynalenePressurePier0101

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from pier gauge TMA-PI-DY-CPM-0101.

dynalenePressurePier0102

IDL_Type:

double

Units:

bar

Description: Dynalene pressure from pier gauge TMA-PI-DY-CPM-0102.

dynaleneTemperatureAzimuth0001

IDL_Type:

double

Units:

deg_C

Description: Dynalene temperature from azimuth gauge TMA-AZ-DY-CTM-0001.

dynaleneTemperatureAzimuth0002

IDL_Type:

double

Units:

deg_C

Description: Dynalene temperature from azimuth gauge TMA-AZ-DY-CTM-0002.

dynaleneTemperaturePier0101

IDL_Type:

double

Units:

deg_C

Description: Dynalene temperature from pier gauge TMA-PI-DY-CTM-0101.

dynaleneTemperaturePier0102

IDL_Type:

double

Units:

deg_C

Description: Dynalene temperature from pier gauge TMA-PI-DY-CTM-0102.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

elevation

EFDB_Topic:

MTMount_elevation

actualPosition

IDL_Type:

double

Units:

deg

Description: Actual position used by the position control loop.

actualTorque

IDL_Type:

double

Units:

N m

Description: Actual torque.

actualVelocity

IDL_Type:

double

Units:

deg/s

Description: Actual velocity.

demandPosition

IDL_Type:

double

Units:

deg

Description: Demand position.

demandVelocity

IDL_Type:

double

Units:

deg/s

Description: Demand velocity.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

elevationDrives

EFDB_Topic:

MTMount_elevationDrives

current

IDL_Type:

double

Units:

A

Count:

12

Description: Actual current of each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

elevationDrivesThermal

EFDB_Topic:

MTMount_elevationDrivesThermal

actualTemperature10

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualTemperature12

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualTemperature2

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualTemperature4

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualTemperature6

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualTemperature8

IDL_Type:

double

Units:

deg_C

Description: Actual surface temperature of each drive.

actualValvePositionElevation

IDL_Type:

double

Units:

%

Count:

2

Description: Actual position (% open) for the mixing valve of each elevation temperature controller.

setpointTemperature

IDL_Type:

double

Units:

deg_C

Count:

2

Description: Setpoint surface temperature for each temperature controller.

setpointValvePositionElevation

IDL_Type:

double

Units:

%

Count:

2

Description: Setpoint position (% open) for the mixing valve of each elevation temperature controller.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

encoder

EFDB_Topic:

MTMount_encoder

azimuthEncoderAbsolutePosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Azimuth absolute position read by each encoder head.

azimuthEncoderPosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Azimuth position (consolidated from absolute and relative positions) read by each encoder head.

azimuthEncoderRelativePosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Azimuth relative position read by each encoder head.

elevationEncoderAbsolutePosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Elevation absolute position read by each encoder head.

elevationEncoderPosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Elevation position (consolidated from absolute and relative positions) read by each encoder head.

elevationEncoderRelativePosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Elevation relative position read by each encoder head.

encoderHeadReadReferenceAZ

IDL_Type:

long long

Units:

unitless

Count:

4

Description: Reference counts for azimuth head 1.

encoderHeadReadReferenceEL

IDL_Type:

long long

Units:

unitless

Count:

4

Description: Reference counts for elevation head 1.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

generalPurposeGlycolWater

EFDB_Topic:

MTMount_generalPurposeGlycolWater

glycolPressureAzimuth0001

IDL_Type:

double

Units:

bar

Description: General purpose glycol water pressure from azimuth gauge TMA-AZ-GP-CPM-0001.

glycolPressureAzimuth0002

IDL_Type:

double

Units:

bar

Description: General purpose glycol water pressure from azimuth gauge TMA-AZ-GP-CPM-0002.

glycolPressurePier0001

IDL_Type:

double

Units:

bar

Description: General purpose glycol water pressure from pier gauge TMA-PI-GP-CPM-0001.

glycolPressurePier0002

IDL_Type:

double

Units:

bar

Description: General purpose glycol water pressure from pier gauge TMA-PI-GP-CPM-0002.

glycolTemperaturePier0001

IDL_Type:

double

Units:

deg_C

Description: General purpose glycol water temperature from pier gauge TMA-PI-GP-CTM-0001.

glycolTemperaturePier0002

IDL_Type:

double

Units:

deg_C

Description: General purpose glycol water temperature from pier gauge TMA-PI-GP-CTM-0002.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

lockingPins

EFDB_Topic:

MTMount_lockingPins

actualPosition

IDL_Type:

double

Units:

mm

Count:

2

Description: Actual position of each pin.

actualTorquePercentage

IDL_Type:

double

Units:

%

Count:

2

Description: Actual torque (percent) of each drive (one per pin).

demandPosition

IDL_Type:

double

Units:

mm

Count:

2

Description: Demand position of each pin.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

mainCabinetThermal

EFDB_Topic:

MTMount_mainCabinetThermal

mainCabinetExternalTemperature

IDL_Type:

double

Units:

deg_C

Description: Temperature of the external sensor atached to cabinet surface.

mainCabinetInternalTemperature

IDL_Type:

double

Units:

deg_C

Count:

2

Description: Temperature inside each cabinet.

setpointTemperature

IDL_Type:

double

Units:

deg_C

Description: Setpoint for cabinet temperature controller.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

mainPowerSupply

EFDB_Topic:

MTMount_mainPowerSupply

powerSupplyCurrent

IDL_Type:

double

Units:

A

Description: DC current from the power supply to the capacitor bank.

powerSupplyVoltage

IDL_Type:

double

Units:

V

Description: DC voltage from the power supply to the capacitor bank.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

mirrorCover

EFDB_Topic:

MTMount_mirrorCover

actualPosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Actual position reported by each drive.

actualTorquePercentage

IDL_Type:

double

Units:

%

Count:

4

Description: Actual torque (percent) of each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

mirrorCoverLocks

EFDB_Topic:

MTMount_mirrorCoverLocks

actualPosition

IDL_Type:

double

Units:

deg

Count:

4

Description: Actual position reported by each drive.

actualTorquePercentage

IDL_Type:

double

Units:

%

Count:

4

Description: Actual torque (percent) of each drive.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

oilSupplySystem

EFDB_Topic:

MTMount_oilSupplySystem

actualTemperatureAzimuthCabinet5001

IDL_Type:

double

Units:

deg_C

Description: Temperature in OSS remote IO cabinet AZ_OS_CBT_5001.

actualTemperatureElevationCabinet5001

IDL_Type:

double

Units:

deg_C

Description: Temperature in OSS remote IO cabinet EL_OS_CBT_5001.

actualTemperatureElevationCabinet5002

IDL_Type:

double

Units:

deg_C

Description: Temperature in OSS remote IO cabinet AZ_OS_CBT_5002.

ambientTemperature

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature.

computedOilFilmThicknessAzimuthBearing5004

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing TMA_AZ_OS_CLM_5004.

computedOilFilmThicknessAzimuthBearing5014

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing TMA_AZ_OS_CLM_5014.

computedOilFilmThicknessAzimuthBearing5024

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_OS_CLM_5024.

computedOilFilmThicknessAzimuthBearing5034

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing TMA_AZ_OS_CLM_5034.

computedOilFilmThicknessAzimuthBearing5044

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing TMA_AZ_OS_CLM_5044.

computedOilFilmThicknessAzimuthBearing5054

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at azimuth hydrostatic bearing TMA_AZ_OS_CLM_5054.

computedOilFilmThicknessElevationBearing5001

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at elevation hydrostatic bearing TMA_EL_OS_CLM_5001.

computedOilFilmThicknessElevationBearing5011

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at elevation hydrostatic bearing TMA_EL_OS_CLM_5011.

computedOilFilmThicknessElevationBearing5021

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at elevation hydrostatic bearing TMA_EL_OS_CLM_5021.

computedOilFilmThicknessElevationBearing5031

IDL_Type:

double

Units:

um

Description: Computed oil film thickness at elevation hydrostatic bearing TMA_EL_OS_CLM_5031.

oilChillerTemperature5012

IDL_Type:

double

Units:

deg_C

Description: Oil chiller temperature from facilities gauge TMA_FA_OC_CTM_5012.

oilChillerTemperature5013

IDL_Type:

double

Units:

deg_C

Description: Oil chiller temperature from facilities gauge TMA_FA_OC_CTM_5013.

oilFilmThicknessAzimuthBearing5001

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5001.

oilFilmThicknessAzimuthBearing5002

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5002.

oilFilmThicknessAzimuthBearing5003

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5003.

oilFilmThicknessAzimuthBearing5004

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5004.

oilFilmThicknessAzimuthBearing5005

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5005.

oilFilmThicknessAzimuthBearing5006

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5006.

oilFilmThicknessAzimuthBearing5011

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5011.

oilFilmThicknessAzimuthBearing5012

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5012.

oilFilmThicknessAzimuthBearing5013

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5013.

oilFilmThicknessAzimuthBearing5014

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5014.

oilFilmThicknessAzimuthBearing5015

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5015.

oilFilmThicknessAzimuthBearing5016

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5016.

oilFilmThicknessAzimuthBearing5017

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5017.

oilFilmThicknessAzimuthBearing5018

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5018.

oilFilmThicknessAzimuthBearing5019

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5019.

oilFilmThicknessAzimuthBearing5021

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5021.

oilFilmThicknessAzimuthBearing5022

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5022.

oilFilmThicknessAzimuthBearing5023

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5023.

oilFilmThicknessAzimuthBearing5024

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5024.

oilFilmThicknessAzimuthBearing5025

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5025.

oilFilmThicknessAzimuthBearing5026

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5026.

oilFilmThicknessAzimuthBearing5031

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5031.

oilFilmThicknessAzimuthBearing5032

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5032.

oilFilmThicknessAzimuthBearing5033

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5033.

oilFilmThicknessAzimuthBearing5034

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5034.

oilFilmThicknessAzimuthBearing5035

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5035.

oilFilmThicknessAzimuthBearing5036

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5034.

oilFilmThicknessAzimuthBearing5041

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5041.

oilFilmThicknessAzimuthBearing5042

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5042.

oilFilmThicknessAzimuthBearing5043

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5043.

oilFilmThicknessAzimuthBearing5044

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5044.

oilFilmThicknessAzimuthBearing5045

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5045.

oilFilmThicknessAzimuthBearing5046

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5046.

oilFilmThicknessAzimuthBearing5047

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5047.

oilFilmThicknessAzimuthBearing5048

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5048.

oilFilmThicknessAzimuthBearing5049

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5049.

oilFilmThicknessAzimuthBearing5051

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5051.

oilFilmThicknessAzimuthBearing5052

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5052.

oilFilmThicknessAzimuthBearing5053

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5053.

oilFilmThicknessAzimuthBearing5054

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5054.

oilFilmThicknessAzimuthBearing5055

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5055.

oilFilmThicknessAzimuthBearing5056

IDL_Type:

double

Units:

um

Description: Oil film thickness at azimuth hydrostatic bearing sensor TMA_AZ_HB_CLM_5056.

oilFilmThicknessElevationBearing5001

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5001.

oilFilmThicknessElevationBearing5002

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5002.

oilFilmThicknessElevationBearing5003

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5003.

oilFilmThicknessElevationBearing5004

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5004.

oilFilmThicknessElevationBearing5005

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5005.

oilFilmThicknessElevationBearing5006

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5006.

oilFilmThicknessElevationBearing5011

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5011.

oilFilmThicknessElevationBearing5012

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5012.

oilFilmThicknessElevationBearing5013

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5013.

oilFilmThicknessElevationBearing5014

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5014.

oilFilmThicknessElevationBearing5015

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5015.

oilFilmThicknessElevationBearing5016

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5016.

oilFilmThicknessElevationBearing5021

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5021.

oilFilmThicknessElevationBearing5022

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5022.

oilFilmThicknessElevationBearing5023

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5023.

oilFilmThicknessElevationBearing5024

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5024.

oilFilmThicknessElevationBearing5025

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5025.

oilFilmThicknessElevationBearing5026

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5026.

oilFilmThicknessElevationBearing5031

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5031.

oilFilmThicknessElevationBearing5032

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5032.

oilFilmThicknessElevationBearing5033

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5033.

oilFilmThicknessElevationBearing5034

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5034.

oilFilmThicknessElevationBearing5035

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5035.

oilFilmThicknessElevationBearing5036

IDL_Type:

double

Units:

um

Description: Oil film thickness at elevation hydrostatic bearing sensor TMA_EL_HB_CLM_5036.

oilFlowRateAzimuth5001

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5001.

oilFlowRateAzimuth5002

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5002.

oilFlowRateAzimuth5011

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5011.

oilFlowRateAzimuth5012

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5012.

oilFlowRateAzimuth5013

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5013.

oilFlowRateAzimuth5021

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5021.

oilFlowRateAzimuth5022

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5022.

oilFlowRateAzimuth5031

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5031.

oilFlowRateAzimuth5032

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5032.

oilFlowRateAzimuth5041

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5041.

oilFlowRateAzimuth5042

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5042.

oilFlowRateAzimuth5043

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5043.

oilFlowRateAzimuth5051

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5051.

oilFlowRateAzimuth5052

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from azimuth gauge TMA_AZ_OS_CFM_5052.

oilFlowRateElevation5001

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5001.

oilFlowRateElevation5002

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5002.

oilFlowRateElevation5011

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5011.

oilFlowRateElevation5012

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5012.

oilFlowRateElevation5021

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5021.

oilFlowRateElevation5022

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5022.

oilFlowRateElevation5031

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5031.

oilFlowRateElevation5032

IDL_Type:

double

Units:

l/min

Description: Oil flow rate from elevation gauge TMA_EL_OS_CFM_5032.

oilLevelFacilities5001

IDL_Type:

double

Units:

mm

Description: Oil level in the oil tank, facilities gauge TMA_FA_OS_CLM_5001.

oilPressureAzimuth5001

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5001.

oilPressureAzimuth5002

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5002.

oilPressureAzimuth5003

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5003.

oilPressureAzimuth5011

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5011.

oilPressureAzimuth5012

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5012.

oilPressureAzimuth5013

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5013.

oilPressureAzimuth5014

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5014.

oilPressureAzimuth5015

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5015.

oilPressureAzimuth5016

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5016.

oilPressureAzimuth5021

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5021.

oilPressureAzimuth5022

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5022.

oilPressureAzimuth5023

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5023.

oilPressureAzimuth5031

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5031.

oilPressureAzimuth5032

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5032.

oilPressureAzimuth5033

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5033.

oilPressureAzimuth5034

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5034.

oilPressureAzimuth5041

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5041.

oilPressureAzimuth5042

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5042.

oilPressureAzimuth5043

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5043.

oilPressureAzimuth5044

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5044.

oilPressureAzimuth5045

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5045.

oilPressureAzimuth5046

IDL_Type:

double

Units:

bar

Description: Oil pressure from azimuth gauge TMA_AZ_OS_CPM_5046.

oilPressureAzimuth5051

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5051.

oilPressureAzimuth5052

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5052.

oilPressureAzimuth5053

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5053.

oilPressureAzimuth5054

IDL_Type:

double

Units:

bar

Description: Oil pressure at gauge TMA_AZ_OS_CPM_5054.

oilPressureElevation5001

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5001.

oilPressureElevation5002

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5002.

oilPressureElevation5003

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5003.

oilPressureElevation5011

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5011.

oilPressureElevation5012

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5012.

oilPressureElevation5013

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5013.

oilPressureElevation5021

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5021.

oilPressureElevation5022

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5022.

oilPressureElevation5023

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5023.

oilPressureElevation5031

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5031.

oilPressureElevation5032

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5032.

oilPressureElevation5033

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5033.

oilPressureElevation5034

IDL_Type:

double

Units:

bar

Description: Oil pressure from elevation gauge TMA_EL_OS_CPM_5034.

oilPressureFacilities5001

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5001.

oilPressureFacilities5002

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5002.

oilPressureFacilities5003

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5003.

oilPressureFacilities5004

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5004.

oilPressureFacilities5005

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5005.

oilPressureFacilities5006

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5006.

oilPressureFacilities5007

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5007.

oilPressureFacilities5008

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5008.

oilPressureFacilities5011

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5011.

oilPressureFacilities5012

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5012.

oilPressureFacilities5013

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5013.

oilPressureFacilities5021

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5021.

oilPressureFacilities5031

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5031.

oilPressureFacilities5051

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5051.

oilPressureFacilities5052

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5052.

oilPressureFacilities5053

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5053.

oilPressureFacilities5054

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5054.

oilPressureFacilities5055

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5055.

oilPressureFacilities5056

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5056.

oilPressureFacilities5057

IDL_Type:

double

Units:

bar

Description: Oil pressure from facilities gauge TMA_FA_OS_CPM_5057.

oilTemperatureAzimuth5001

IDL_Type:

double

Units:

deg_C

Description: Oil temperature at gauge TMA_AZ_OS_CTM_5001.

oilTemperatureAzimuth5011

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from azimuth gauge TMA_AZ_OS_CTM_5011.

oilTemperatureAzimuth5021

IDL_Type:

double

Units:

deg_C

Description: Oil temperature at gauge TMA_AZ_OS_CTM_5021.

oilTemperatureAzimuth5031

IDL_Type:

double

Units:

deg_C

Description: Oil temperature at gauge TMA_AZ_OS_CTM_5031.

oilTemperatureAzimuth5041

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from azimuth gauge TMA_AZ_OS_CTM_5041.

oilTemperatureAzimuth5051

IDL_Type:

double

Units:

deg_C

Description: Oil temperature at gauge TMA_AZ_OS_CTM_5051.

oilTemperatureElevation5001

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5001.

oilTemperatureElevation5011

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5011.

oilTemperatureElevation5021

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5021.

oilTemperatureElevation5031

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5031.

oilTemperatureElevation5101

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5101.

oilTemperatureElevation5111

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from elevation gauge TMA_EL_OS_CTM_5111.

oilTemperatureFacilities5001

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from facilities gauge TMA_FA_OS_CTM_5001.

oilTemperatureFacilities5002

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from facilities gauge TMA_FA_OS_CTM_5002.

oilTemperatureFacilities5011

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from facilities gauge TMA_FA_OS_CTM_5011.

oilTemperatureFacilities5121

IDL_Type:

double

Units:

deg_C

Description: Oil temperature from facilities gauge TMA_FA_OS_CTM_5121.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

valvePositionFacilities5201

IDL_Type:

double

Units:

%

Description: Position of oil valve TMA_FA_OS_AAA_5201_PV.

safetySystem

EFDB_Topic:

MTMount_safetySystem

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).

versionNumber

IDL_Type:

double

Units:

unitless

Description: Version number of the Safety code.

telemetryClientHeartbeat

Description: Heartbeat output by the MTMount CSC’s telemetry client (not the TMA).

EFDB_Topic:

MTMount_telemetryClientHeartbeat

topEndChiller

EFDB_Topic:

MTMount_topEndChiller

actualTemperatureAmbient

IDL_Type:

double

Units:

deg_C

Description: Actual ambient temperature (?).

actualTemperatureArea

IDL_Type:

double

Units:

deg_C

Count:

5

Description: Actual temperature in each area.

ambientRelativeHumiditySensor0501

IDL_Type:

double

Units:

%

Description: Ambient relative humidity measured by sensor 0501.

ambientRelativeHumiditySensor0502

IDL_Type:

double

Units:

%

Description: Ambient relative humidity measured by sensor 0502.

ambientRelativeHumiditySensor0504

IDL_Type:

double

Units:

%

Description: Ambient relative humidity measured by sensor 0504.

ambientRelativeHumiditySensor0505

IDL_Type:

double

Units:

%

Description: Ambient relative humidity measured by sensor 0505.

ambientTemperature

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature (measured? commanded?).

ambientTemperatureSensor0502

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature measured by sensor 0502.

ambientTemperatureSensor0504

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature measured by sensor 0504.

ambientTemperatureSensor0505

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature measured by sensor 0505.

ductTemperatureSensor0506

IDL_Type:

double

Units:

deg_C

Description: Duct temperature measured by sensor 0506.

ductTemperatureSensor0507

IDL_Type:

double

Units:

deg_C

Description: Duct temperature measured by sensor 0507.

externalTemperatureElectricalCabinet

IDL_Type:

double

Units:

deg_C

Count:

4

Description: External temperature of each electrical cabinet.

heatExchangerSupplyTemperature

IDL_Type:

double

Units:

deg_C

Description: Temperature of HX supply.

internalTemperatureElectricalCabinet

IDL_Type:

double

Units:

deg_C

Count:

4

Description: Internal temperature of each electrical cabinet.

temperatureSensor0501

IDL_Type:

double

Units:

deg_C

Description: Ambient temperature measured by sensor 0501.

threeWayValvePosition201

IDL_Type:

double

Units:

%

Description: Position of three-way valve 201.

threeWayValvePosition202

IDL_Type:

double

Units:

%

Description: Position of three-way valve 202.

timestamp

IDL_Type:

double

Units:

second

Description: Time at which the data was measured (TAI, unix seconds).