DIMM¶
Note
This page is generated by python script generate_cet.py.
Commands¶
changeDwellRate¶
Description: Change dwell rate. Sample rate in ms for low level.
- EFDB_Topic:
DIMM_command_changeDwellRate
sampleRate¶
- IDL_Type:
int
- Units:
ms
Description: New sample rate.
changeMeasurementRate¶
Description: Change measurement rate in Hz.
- EFDB_Topic:
DIMM_command_changeMeasurementRate
measurementRate¶
- IDL_Type:
int
- Units:
Hz
Description: New measurement rate.
gotoAltAz¶
Description: Slew telescope to target Alt/Az.
- EFDB_Topic:
DIMM_command_gotoAltAz
alt¶
- IDL_Type:
double
- Units:
deg
Description: Altitude of target.
az¶
- IDL_Type:
double
- Units:
deg
Description: Azimuth of target.
gotoRaDec¶
Description: Slew telescope to target RA/DEC.
- EFDB_Topic:
DIMM_command_gotoRaDec
ra¶
- IDL_Type:
double
- Units:
deg
Description: RA of target.
decl¶
- IDL_Type:
double
- Units:
deg
Description: Declination of target.
track¶
- IDL_Type:
boolean
- Units:
unitless
Description: Track target.
disable¶
Description: Transition from state Enabled to Disabled.
- EFDB_Topic:
SALGeneric_command_disable
- Category:
csc
enable¶
Description: Transition from state Disabled to Enabled.
- EFDB_Topic:
SALGeneric_command_enable
- Category:
csc
exitControl¶
Description: Transition from state Standby to Offline. Most CSCs will quit, but CSCs that support the enterControl command will keep running.
- EFDB_Topic:
SALGeneric_command_exitControl
- Category:
csc
setLogLevel¶
Description: Set the logging level.
- EFDB_Topic:
SALGeneric_command_setLogLevel
- Category:
csc
level¶
- IDL_Type:
int
- Units:
unitless
Description: Logging level, as a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type:
string
- Units:
unitless
Description: If this CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to this CSC itself.
standby¶
Description: Transition from state Offline/Available, Disabled or Fault to Standby.
- EFDB_Topic:
SALGeneric_command_standby
- Category:
csc
start¶
Description: Transition from state Standby to Disable, in a specified configuration.
- EFDB_Topic:
SALGeneric_command_start
- Category:
csc
configurationOverride¶
- IDL_Type:
string
- Units:
unitless
- Description:
Configuration override in the form [{name}][:{version}]. For salobj-based CSCs: name is a filename with “.yaml” suffix and version is a git hash; for example:
“foo.yaml” specifies just a file. Two or three config files are loaded: “_init.yaml”, “_{site}.yaml” (if present), and “foo.yaml”.
“:37bf936” specifies just a git hash. One or two config files are loaded from the specified git commit: “_init.yaml” and “_{site}.yaml” (if present.
“bar.yaml:HEAD~2” specifies both a file and a git hash. Two or three config files are read from the specified git commit: “_init.yaml”, “_{site}.yaml” (if present), and “bar.yaml”.
Events¶
dimmData¶
Description: DIMM data details
- EFDB_Topic:
DIMM_logevent_dimmData
numFrames¶
- IDL_Type:
long
- Units:
unitless
Description: The number of frames.
spot1Flux¶
- IDL_Type:
long
- Units:
unitless
Description: The flux of spot 1
splot2Flux¶
- IDL_Type:
long
- Units:
unitless
Description: The flux of splot2.
spot1RMSFlux¶
- IDL_Type:
long
- Units:
unitless
Description: The RMS flux of spot1.
spot2RMSFlux¶
- IDL_Type:
long
- Units:
unitless
Description: The RMS flux of spot2.
spot1MaxInten¶
- IDL_Type:
long
- Units:
unitless
Description: The maximum Intention of spot 1.
spot2MaxInten¶
- IDL_Type:
long
- Units:
unitless
Description: The maximum intention of spot 2.
seperationX¶
- IDL_Type:
long
- Units:
unitless
Description: The separation of x axis.
seperationY¶
- IDL_Type:
long
- Units:
unitless
Description: The separation of the y axis.
seperationRMSX¶
- IDL_Type:
double
- Units:
unitless
Description: The separation of the RMS X axis.
seperationRMSY¶
- IDL_Type:
double
- Units:
unitless
Description: The seperation of the RMS Y axis.
covarianceX¶
- IDL_Type:
double
- Units:
unitless
Description: The covariance of the X axis.
covarianceY¶
- IDL_Type:
double
- Units:
unitless
Description: The covariance of the Y axis.
noiseRMSX¶
- IDL_Type:
double
- Units:
unitless
Description: The noise RMS of the X axis.
noiseRMSY¶
- IDL_Type:
double
- Units:
unitless
Description: The noise RMS of axis Y.
averagePositionX¶
- IDL_Type:
double
- Units:
unitless
Description: The average position of the X axis.
averagePositionY¶
- IDL_Type:
double
- Units:
unitless
Description: The average position of Y axis.
averagePositionRMSX¶
- IDL_Type:
double
- Units:
unitless
Description: The average position RMS of axis X.
averagePositionRMSY¶
- IDL_Type:
double
- Units:
unitless
Description: The average position RMS Y.
averageFWHMspot1¶
- IDL_Type:
double
- Units:
unitless
Description: The average FWHM of spot 1.
averageFWHMspot2¶
- IDL_Type:
double
- Units:
unitless
Description: The average FWHM of spot 2.
averageEllipticityspot1¶
- IDL_Type:
double
- Units:
unitless
Description: The average ellipticity of spot 1.
averageEllipticityspot2¶
- IDL_Type:
double
- Units:
unitless
Description: The average ellipticity of spot 2.
averageBackground¶
- IDL_Type:
double
- Units:
unitless
Description: The average background
backgroundRMS¶
- IDL_Type:
double
- Units:
unitless
Description: The background RMS.
dimmMeasurement¶
Description: A DIMM measurement
- EFDB_Topic:
DIMM_logevent_dimmMeasurement
timestamp¶
- IDL_Type:
double
- Units:
second
Description: The time of the event.
expiresAt¶
- IDL_Type:
double
- Units:
second
Description: Timestamp (UTC) until when the measurement is deemed valid.
expiresIn¶
- IDL_Type:
float
- Units:
second
Description: Duration the measurement is deemed valid since publication.
hrNum¶
- IDL_Type:
long
- Units:
unitless
Description: HR star number
secz¶
- IDL_Type:
float
- Units:
am
Description: Airmass of the observation
fwhm¶
- IDL_Type:
float
- Units:
arcsec
Description: Combined full width half maximum.
fwhmx¶
- IDL_Type:
float
- Units:
arcsec
Description: Full width half maximum in the x-axis.
fwhmy¶
- IDL_Type:
float
- Units:
arcsec
Description: Full width half maximum in the y-axis.
r0¶
- IDL_Type:
float
- Units:
cm
Description: Fried parameter
nimg¶
- IDL_Type:
long
- Units:
unitless
Description: Number of images used.
dx¶
- IDL_Type:
float
- Units:
arcsec
Description: Distance between spots in the x-axis
dy¶
- IDL_Type:
float
- Units:
arcsec
Description: Distance between spots in the y-axis
flux¶
- IDL_Type:
float
- Units:
adu
Description: Total average flux this time bin
fluxL¶
- IDL_Type:
float
- Units:
adu
Description: Flux (left spot)
scintL¶
- IDL_Type:
float
- Units:
unitless
Description: Scintillation-ratio (left spot)
strehlL¶
- IDL_Type:
float
- Units:
unitless
Description: Strehl-ratio (left spot)
fluxR¶
- IDL_Type:
float
- Units:
adu
Description: Flux (right spot)
scintR¶
- IDL_Type:
float
- Units:
unitless
Description: Scintillation-ratio (right spot)
strehlR¶
- IDL_Type:
float
- Units:
unitless
Description: Strehl-ratio (right spot)
moduleStatus¶
Description: Module statuses
- EFDB_Topic:
DIMM_logevent_moduleStatus
scopeStatus¶
- IDL_Type:
boolean
- Units:
unitless
Description: Subsystem status for Scope module.
masterStatus¶
- IDL_Type:
boolean
- Units:
unitless
Description: Subsystem status for Master module.
metrologyStatus¶
- IDL_Type:
boolean
- Units:
unitless
Description: Subsystem status for Metrology module.
domeStatus¶
- IDL_Type:
boolean
- Units:
unitless
Description: Subsystem status for Metrology module.
dimmStatus¶
- IDL_Type:
boolean
- Units:
unitless
Description: Subsystem status for DIMM processing module.
configurationApplied¶
Description: Information about this CSC’s current configuration overrides.
- EFDB_Topic:
SALGeneric_logevent_configurationApplied
- Category:
configurable
configurations¶
- IDL_Type:
string
- Units:
unitless
Description: A comma-separated list of configurations applied. If configuration comes from a clone of a git repo, or similar directory, then it will be a list of file names, without the file extension. Ignore whitespace after commas.
version¶
- IDL_Type:
string
- Units:
unitless
Description: Version of the configuration source. For a clone of a git repo it will be a git hash.
url¶
- IDL_Type:
string
- Units:
unitless
Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL. This should always match the same-named field in configurationsAvailable.
schemaVersion¶
- IDL_Type:
string
- Units:
unitless
Description: Version of config schema used by this CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”. This should always match the same-named field in configurationsAvailable.
otherInfo¶
- IDL_Type:
string
- Units:
unitless
Description: A comma-separated list of event topics (without the logevent prefix) used to publish the entire set of configuration parameters loaded by this CSC, and any other pertinent information. Ignore whitespace after commas.
configurationsAvailable¶
Description: Available configuration overrides for this CSC.
- EFDB_Topic:
SALGeneric_logevent_configurationsAvailable
- Category:
configurable
overrides¶
- IDL_Type:
string
- Units:
unitless
Description: Available overrides as a comma-separated list. Each entry is a possible value of the configurationOverride field of the start command. Ignore whitespace after commas.
version¶
- IDL_Type:
string
- Units:
unitless
Description: Version of the configuration source. For a clone of a git repo it will be a git hash.
url¶
- IDL_Type:
string
- Units:
unitless
Description: URL of the configuration source. For a clone of a git repo this will be a file URL. For a database it will be a standard database URL.
schemaVersion¶
- IDL_Type:
string
- Units:
unitless
Description: Version of config schema used by this CSC. For a configuration git repo, this is the name of a folder in the config package, and is typically something like “v1”.
errorCode¶
Description: Output when this CSC goes into the Fault state as an explanation of the problem.
- EFDB_Topic:
SALGeneric_logevent_errorCode
- Category:
csc
errorCode¶
- IDL_Type:
long
- Units:
unitless
Description: A numeric error code.
errorReport¶
- IDL_Type:
string
- Units:
unitless
Description: An string providing detailed information about the error.
traceback¶
- IDL_Type:
string
- Units:
unitless
Description: An optional stack trace of the error condition.
heartbeat¶
Description: Event output at regular intervals (typcally once per second) to show that the SAL component is alive.
- EFDB_Topic:
SALGeneric_logevent_heartbeat
- Category:
mandatory
heartbeat¶
- IDL_Type:
boolean
- Units:
unitless
Description: Deprecated field that you should ignore.
logLevel¶
Description: Current logging level.
- EFDB_Topic:
SALGeneric_logevent_logLevel
- Category:
mandatory
level¶
- IDL_Type:
int
- Units:
unitless
Description: Current logging level, a Python logging level: error=40, warning=30, info=20, debug=10.
subsystem¶
- IDL_Type:
string
- Units:
unitless
Description: If this CSC itself has sub-ordinate components, they may be listed here. An empty string means the setting applies to all such sub-ordinate components, or just to this CSC itself.
logMessage¶
Description: A log message.
- EFDB_Topic:
SALGeneric_logevent_logMessage
- Category:
mandatory
name¶
- IDL_Type:
string
- Units:
unitless
Description: Log name.
level¶
- IDL_Type:
int
- Units:
unitless
Description: Message level, a Python logging level: error=40, warning=30, info=20, debug=10.
message¶
- IDL_Type:
string
- Units:
unitless
Description: Log message.
traceback¶
- IDL_Type:
string
- Units:
unitless
Description: Exception traceback; “” if not an exception.
filePath¶
- IDL_Type:
string
- Units:
unitless
Description: Path to source file.
functionName¶
- IDL_Type:
string
- Units:
unitless
Description: Function or method name.
lineNumber¶
- IDL_Type:
long
- Units:
unitless
Description: Line number in the file specified by filePath.
process¶
- IDL_Type:
long
- Units:
unitless
Description: Process ID.
timestamp¶
- IDL_Type:
double
- Units:
second
Description: The time at which the condition being reported was observed (TAI unix seconds). 0 if unspecified.
simulationMode¶
Description: Current simulation mode.
- EFDB_Topic:
SALGeneric_logevent_simulationMode
- Category:
csc
mode¶
- IDL_Type:
int
- Units:
unitless
Description: Current simulation mode; 0 for normal operation (no simulation); other supported values are specific to each CSC.
softwareVersions¶
Description: Current versions of software in use by CSC.
- EFDB_Topic:
SALGeneric_logevent_softwareVersions
- Category:
mandatory
salVersion¶
- IDL_Type:
string
- IDL_Size:
256
- Units:
unitless
Description: This is the current version of SAL generation.
xmlVersion¶
- IDL_Type:
string
- IDL_Size:
256
- Units:
unitless
Description: This is the current version of CSC XML.
openSpliceVersion¶
- IDL_Type:
string
- IDL_Size:
256
- Units:
unitless
Description: This is the current version of OpenSplice.
cscVersion¶
- IDL_Type:
string
- IDL_Size:
256
- Units:
unitless
Description: The software version of this CSC.
subsystemVersions¶
- IDL_Type:
string
- Units:
unitless
Description: A comma delimited list of key=value pairs relating subsystem name (key) to its version number (value). This may be left blank if there are no subsystems within this CSC.
summaryState¶
Description: Current summary state of this CSC.
- EFDB_Topic:
SALGeneric_logevent_summaryState
- Category:
csc
summaryState¶
- IDL_Type:
long
- Units:
unitless
Description: High level state machine state identifier.
Telemetry¶
meterology¶
Description: Meterology data
- EFDB_Topic:
DIMM_meterology
ambientTemperature¶
- IDL_Type:
float
- Units:
deg_C
Description: The ambient temperature.
dewpointTemperature¶
- IDL_Type:
float
- Units:
deg_C
Description: The dewpoint temperature.
pressure¶
- IDL_Type:
double
- Units:
mbar
Description: The pressure outside.
humidity¶
- IDL_Type:
double
- Units:
%
Description: The humidity outside.
windSpeed¶
- IDL_Type:
float
- Units:
m/s
Description: The wind speed.
windDirection¶
- IDL_Type:
float
- Units:
deg
Description: The wind direction.
sky¶
Description: Sky status
- EFDB_Topic:
DIMM_sky
status¶
- IDL_Type:
long
- Units:
unitless
- Enumeration:
clear=0,lightcoverage=1,cloudy=2,rain=3,snow=4
Description: The current sky status.
status¶
Description: DIMM status data
- EFDB_Topic:
DIMM_status
status¶
- IDL_Type:
long
- Units:
unitless
Description: The status of the DIMM.
hrNum¶
- IDL_Type:
long
- Units:
unitless
Description: HR star number
altitude¶
- IDL_Type:
float
- Units:
degree
Description: The altitude position of the DIMM
azimuth¶
- IDL_Type:
float
- Units:
degree
Description: The azimuth position of the DIMM
ra¶
- IDL_Type:
float
- Units:
degree
Description: The right-ascension position of the DIMM
decl¶
- IDL_Type:
float
- Units:
degree
Description: The declination position of the DIMM